Nucleo G071RB

Hardware

Platform ST STM32: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.

Microcontroller

STM32G071RBT6

Frequency

64MHz

Flash

128KB

RAM

36KB

Vendor

ST

Configuration

Please use nucleo_g071rb ID for board option in “platformio.ini” (Project Configuration File):

[env:nucleo_g071rb]
platform = ststm32
board = nucleo_g071rb

You can override default Nucleo G071RB settings per build environment using board_*** option, where *** is a JSON object path from board manifest nucleo_g071rb.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:nucleo_g071rb]
platform = ststm32
board = nucleo_g071rb

; change microcontroller
board_build.mcu = stm32g071rbt6

; change MCU frequency
board_build.f_cpu = 64000000L

Uploading

Nucleo G071RB supports the next uploading protocols:

  • blackmagic

  • jlink

  • mbed

Default protocol is mbed

You can change upload protocol using upload_protocol option:

[env:nucleo_g071rb]
platform = ststm32
board = nucleo_g071rb

upload_protocol = mbed

Debugging

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Nucleo G071RB does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.

Compatible Tools

On-board

Default

Black Magic Probe

Yes

J-LINK

Frameworks

Name

Description

Arduino

Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences.

Zephyr

The Zephyr Project is a scalable real-time operating system (RTOS) supporting multiple hardware architectures, optimized for resource constrained devices, and built with safety and security in mind.