Debugging options

See also

Please make sure to read PIO Unified Debugger guide first.

debug_tool

Type: String | Multiple: No

A name of debugging tool. This option is useful when board supports more than one debugging tool (adapter, probe) or you want to create Custom debugging configuration.

See available tools in Tools & Debug Probes.

Example

[env:debug]
platform = ...
board = ...
debug_tool = custom

debug_build_flags

New in version 4.2.0.

Type: String | Multiple: Yes | Default: -Og -g2 -ggdb2

These flags/options affect the preprocessing, compilation, assembly and linking processes for C and C++ code.

Note

This option might be helpful to adjust the optimization level if firmware with debug information is too big to be uploaded to a target

Example

[env:debug]
platform = ...
board = ...

; Set optimization level and amount of debug information generated by the compiler
debug_build_flags = -O0 -ggdb3 -g3

Other possible flags that might be useful for debugging your application.

debug_init_break

Type: String | Multiple: No | Default: tbreak main

An initial breakpoint that makes your program stop whenever a certain point in the program is reached. Default value is set to tbreak main and means creating a temporary breakpoint at int main(...) function and automatically delete it after the first time a program stops there.

Note

Please note that each debugging tool (adapter, probe) has limited number of hardware breakpoints.

If you need more Project Initial Breakpoints, please place them in debug_extra_cmds.

Examples

[env:debug]
platform = ...
board = ...

; Examples 1: disable initial breakpoint
debug_init_break =

; Examples 2: temporary stop at ``void loop()`` function
debug_init_break = tbreak loop

; Examples 3: stop in main.cpp at line 13
debug_init_break = break main.cpp:13

; Examples 4: temporary stop at ``void Reset_Handler(void)``
debug_init_break = tbreak Reset_Handler

debug_init_cmds

Type: String | Multiple: Yes | Default: See details…

Initial commands that will be passed to back-end debugger.

PlatformIO dynamically configures back-end debugger depending on a debug environment. Here is a list with default initial commands for the popular Tools & Debug Probes.

For example, the custom initial commands for GDB:

[env:debug]
platform = ...
board = ...
debug_init_cmds =
  target extended-remote $DEBUG_PORT
  $INIT_BREAK
  monitor reset halt
  $LOAD_CMDS
  monitor init
  monitor reset halt

debug_extra_cmds

Type: String | Multiple: Yes

Extra commands that will be passed to back-end debugger after debug_init_cmds. For example, add custom breakpoint and load .gdbinit from a project directory for GDB:

[env:debug]
platform = ...
board = ...
debug_extra_cmds =
  break main.cpp:13
  break foo.cpp:100
  source .gdbinit

Note

Initial Project Breakpoints: Use break path/to/file:LINE_NUMBER to define initial breakpoints for debug environment. Multiple breakpoints are allowed.

To save session breakpoints, please use save breakpoints [filename] command in Debug Console. For example, save breakpoints .gdbinit. Later, this file could be loaded via source [filename] command. See above.

debug_load_cmds

New in version 4.0.

Type: String | Multiple: Yes | Default: load

Specify a command which will be used to load program/firmware to a target device. Possible options:

  • load - default option

  • load [address] - load program at specified address, where “[address]” should be a valid number

  • preload - some embedded devices have locked Flash Memory (a few Freescale Kinetis and NXP LPC boards). In this case, firmware loading using debugging client is disabled. preload command instructs PlatformIO Core (CLI) to load program/firmware using development platform “upload” method (via bootloader, media disk, etc)

  • (empty value, debug_load_cmds =), disables program loading at all.

  • custom commands - pass any debugging client command (GDB, etc.)

Sometimes you need to run extra monitor commands (on debug server side) before program/firmware loading, such as flash unlocking or erasing. In this case we can combine service commands with loading and run them before. See example:

[env:debug]
platform = ...
board = ...
debug_load_cmds =
  monitor flash erase_sector 0 0 11
  load

debug_load_mode

Type: String | Multiple: No | Default: always

Allows one to control when PlatformIO should load debugging firmware to the end target. Possible options:

  • always - load for the each debugging session, default

  • modified - load only when firmware was modified

  • manual - do not load firmware automatically. You are responsible to pre-flash target with debugging firmware in this case.

debug_server

Type: String | Multiple: Yes

Allows one to setup a custom debugging server. By default, boards are pre-configured with a debugging server that is compatible with “on-board” debugging tool (adapter, probe). Also, this option is useful for a Custom debugging tool.

Option format (multi-line):

  • First line is an executable path of debugging server

  • 2-nd and the next lines are arguments for executable file

Example:

[env:debug]
platform = ...
board = ...
debug_server =
  /path/to/debugging/server
  arg1
  arg2
  ...
  argN

debug_port

Type: String | Multiple: No

A debugging port of a remote target. Could be a serial device or network address. PlatformIO detects it automatically if is not specified.

For example:

  • /dev/ttyUSB0 - Unix-based OS

  • COM3 - Windows OS

  • localhost:3333

debug_svd_path

Type: FilePath | Multiple: No

A custom path to SVD file which contains information about device peripherals.