#!/usr/bin/env bash

# 7l is based on 7h, but adding a 64 dim lowrank module in the xent branch
#System                   tdnn_7h    tdnn_7l
#WER on train_dev(tg)     13.84      13.83
#WER on train_dev(fg)     12.84      12.88
#WER on eval2000(tg)      16.5       16.4
#WER on eval2000(fg)      14.8       14.7
#Final train prob         -0.089     -0.090
#Final valid prob         -0.113     -0.116
#Final train prob (xent)  -1.25      -1.38
#Final valid prob (xent)  -1.36      -1.48
#Time consuming one iter  53.56s     48.18s  
#Time reduction percent   10.1%
set -e

# configs for 'chain'
affix=
stage=12
train_stage=-10
get_egs_stage=-10
speed_perturb=true
dir=exp/chain/tdnn_7l  # Note: _sp will get added to this if $speed_perturb == true.
decode_iter=

# training options
num_epochs=4
initial_effective_lrate=0.001
final_effective_lrate=0.0001
leftmost_questions_truncate=-1
max_param_change=2.0
final_layer_normalize_target=0.5
num_jobs_initial=3
num_jobs_final=16
minibatch_size=128
frames_per_eg=150
remove_egs=false
common_egs_dir=
xent_regularize=0.1

# End configuration section.
echo "$0 $@"  # Print the command line for logging

. ./cmd.sh
. ./path.sh
. ./utils/parse_options.sh

if ! cuda-compiled; then
  cat <<EOF && exit 1
This script is intended to be used with GPUs but you have not compiled Kaldi with CUDA
If you want to use GPUs (and have them), go to src/, and configure and make on a machine
where "nvcc" is installed.
EOF
fi

# The iVector-extraction and feature-dumping parts are the same as the standard
# nnet3 setup, and you can skip them by setting "--stage 8" if you have already
# run those things.

suffix=
if [ "$speed_perturb" == "true" ]; then
  suffix=_sp
fi

dir=${dir}${affix:+_$affix}$suffix
train_set=train_nodup$suffix
ali_dir=exp/tri4_ali_nodup$suffix
treedir=exp/chain/tri5_7d_tree$suffix
lang=data/lang_chain_2y


# if we are using the speed-perturbed data we need to generate
# alignments for it.
local/nnet3/run_ivector_common.sh --stage $stage \
  --speed-perturb $speed_perturb \
  --generate-alignments $speed_perturb || exit 1;


if [ $stage -le 9 ]; then
  # Get the alignments as lattices (gives the LF-MMI training more freedom).
  # use the same num-jobs as the alignments
  nj=$(cat exp/tri4_ali_nodup$suffix/num_jobs) || exit 1;
  steps/align_fmllr_lats.sh --nj $nj --cmd "$train_cmd" data/$train_set \
    data/lang exp/tri4 exp/tri4_lats_nodup$suffix
  rm exp/tri4_lats_nodup$suffix/fsts.*.gz # save space
fi


if [ $stage -le 10 ]; then
  # Create a version of the lang/ directory that has one state per phone in the
  # topo file. [note, it really has two states.. the first one is only repeated
  # once, the second one has zero or more repeats.]
  rm -rf $lang
  cp -r data/lang $lang
  silphonelist=$(cat $lang/phones/silence.csl) || exit 1;
  nonsilphonelist=$(cat $lang/phones/nonsilence.csl) || exit 1;
  # Use our special topology... note that later on may have to tune this
  # topology.
  steps/nnet3/chain/gen_topo.py $nonsilphonelist $silphonelist >$lang/topo
fi

if [ $stage -le 11 ]; then
  # Build a tree using our new topology. This is the critically different
  # step compared with other recipes.
  steps/nnet3/chain/build_tree.sh --frame-subsampling-factor 3 \
      --leftmost-questions-truncate $leftmost_questions_truncate \
      --context-opts "--context-width=2 --central-position=1" \
      --cmd "$train_cmd" 7000 data/$train_set $lang $ali_dir $treedir
fi

if [ $stage -le 12 ]; then
  echo "$0: creating neural net configs using the xconfig parser";

  num_targets=$(tree-info $treedir/tree |grep num-pdfs|awk '{print $2}')
  learning_rate_factor=$(echo "print (0.5/$xent_regularize)" | python)

  mkdir -p $dir/configs
  cat <<EOF > $dir/configs/network.xconfig
  input dim=100 name=ivector
  input dim=40 name=input
  # please note that it is important to have input layer with the name=input
  # as the layer immediately preceding the fixed-affine-layer to enable
  # the use of short notation for the descriptor
  fixed-affine-layer name=lda input=Append(-1,0,1,ReplaceIndex(ivector, t, 0)) affine-transform-file=$dir/configs/lda.mat
  # the first splicing is moved before the lda layer, so no splicing here
  relu-renorm-layer name=tdnn1 dim=625
  relu-renorm-layer name=tdnn2 input=Append(-1,0,1) dim=625
  relu-renorm-layer name=tdnn3 input=Append(-1,0,1) dim=625
  relu-renorm-layer name=tdnn4 input=Append(-3,0,3) dim=625
  relu-renorm-layer name=tdnn5 input=Append(-3,0,3) dim=625
  relu-renorm-layer name=tdnn6 input=Append(-3,0,3) dim=625
  relu-renorm-layer name=tdnn7 input=Append(-3,0,3) dim=625
  ## adding the layers for chain branch
  relu-renorm-layer name=prefinal-chain input=tdnn7 dim=625 target-rms=0.5
  output-layer name=output include-log-softmax=false dim=$num_targets max-change=1.5
  # adding the layers for xent branch
  # This block prints the configs for a separate output that will be
  # trained with a cross-entropy objective in the 'chain' models... this
  # has the effect of regularizing the hidden parts of the model.  we use
  # 0.5 / args.xent_regularize as the learning rate factor- the factor of
  # 0.5 / args.xent_regularize is suitable as it means the xent
  # final-layer learns at a rate independent of the regularization
  # constant; and the 0.5 was tuned so as to make the relative progress
  # similar in the xent and regular final layers.
  relu-renorm-layer name=prefinal-xent input=tdnn7 dim=625 target-rms=0.5
  relu-renorm-layer name=prefinal-lowrank-xent input=prefinal-xent dim=64 target-rms=0.5
  output-layer name=output-xent dim=$num_targets learning-rate-factor=$learning_rate_factor max-change=1.5
EOF
  steps/nnet3/xconfig_to_configs.py --xconfig-file $dir/configs/network.xconfig --config-dir $dir/configs/
fi

if [ $stage -le 13 ]; then
  if [[ $(hostname -f) == *.clsp.jhu.edu ]] && [ ! -d $dir/egs/storage ]; then
    utils/create_split_dir.pl \
     /export/b0{5,6,7,8}/$USER/kaldi-data/egs/swbd-$(date +'%m_%d_%H_%M')/s5c/$dir/egs/storage $dir/egs/storage
  fi

  steps/nnet3/chain/train.py --stage $train_stage \
    --cmd "$decode_cmd" \
    --feat.online-ivector-dir exp/nnet3/ivectors_${train_set} \
    --feat.cmvn-opts "--norm-means=false --norm-vars=false" \
    --chain.xent-regularize $xent_regularize \
    --chain.leaky-hmm-coefficient 0.1 \
    --chain.l2-regularize 0.00005 \
    --chain.apply-deriv-weights false \
    --chain.lm-opts="--num-extra-lm-states=2000" \
    --egs.dir "$common_egs_dir" \
    --egs.stage $get_egs_stage \
    --egs.opts "--frames-overlap-per-eg 0" \
    --egs.chunk-width $frames_per_eg \
    --trainer.num-chunk-per-minibatch $minibatch_size \
    --trainer.frames-per-iter 1500000 \
    --trainer.num-epochs $num_epochs \
    --trainer.optimization.num-jobs-initial $num_jobs_initial \
    --trainer.optimization.num-jobs-final $num_jobs_final \
    --trainer.optimization.initial-effective-lrate $initial_effective_lrate \
    --trainer.optimization.final-effective-lrate $final_effective_lrate \
    --trainer.max-param-change $max_param_change \
    --cleanup.remove-egs $remove_egs \
    --feat-dir data/${train_set}_hires \
    --tree-dir $treedir \
    --lat-dir exp/tri4_lats_nodup$suffix \
    --dir $dir  || exit 1;

fi

if [ $stage -le 14 ]; then
  # Note: it might appear that this $lang directory is mismatched, and it is as
  # far as the 'topo' is concerned, but this script doesn't read the 'topo' from
  # the lang directory.
  utils/mkgraph.sh --self-loop-scale 1.0 data/lang_sw1_tg $dir $dir/graph_sw1_tg
fi

decode_suff=sw1_tg
graph_dir=$dir/graph_sw1_tg
if [ $stage -le 15 ]; then
  iter_opts=
  if [ ! -z $decode_iter ]; then
    iter_opts=" --iter $decode_iter "
  fi
  for decode_set in train_dev eval2000; do
      (
      steps/nnet3/decode.sh --acwt 1.0 --post-decode-acwt 10.0 \
          --nj 50 --cmd "$decode_cmd" $iter_opts \
          --online-ivector-dir exp/nnet3/ivectors_${decode_set} \
          $graph_dir data/${decode_set}_hires $dir/decode_${decode_set}${decode_iter:+_$decode_iter}_${decode_suff} || exit 1;
      if $has_fisher; then
          steps/lmrescore_const_arpa.sh --cmd "$decode_cmd" \
            data/lang_sw1_{tg,fsh_fg} data/${decode_set}_hires \
            $dir/decode_${decode_set}${decode_iter:+_$decode_iter}_sw1_{tg,fsh_fg} || exit 1;
      fi
      ) &
  done
fi
wait;
exit 0;
