=========================================================== .___ __ __ _________________ __ __ __| _/|__|/ |_ / ___\_` __ \__ \ | | \/ __ | | \\_ __\ / /_/ > | \// __ \| | / /_/ | | || | \___ /|__| (____ /____/\____ | |__||__| /_____/ \/ \/ grep rough audit - static analysis tool v2.8 written by @Wireghoul =================================[justanotherhacker.com]=== gv-3.7.4/lib/Makefile.in-123- while test -n "$$dir1"; do \ gv-3.7.4/lib/Makefile.in:124: first=`echo "$$dir1" | sed -e "$$sed_first"`; \ gv-3.7.4/lib/Makefile.in-125- if test "$$first" != "."; then \ gv-3.7.4/lib/Makefile.in-126- if test "$$first" = ".."; then \ gv-3.7.4/lib/Makefile.in:127: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ gv-3.7.4/lib/Makefile.in:128: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ gv-3.7.4/lib/Makefile.in-129- else \ gv-3.7.4/lib/Makefile.in:130: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ gv-3.7.4/lib/Makefile.in-131- if test "$$first2" = "$$first"; then \ gv-3.7.4/lib/Makefile.in:132: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ gv-3.7.4/lib/Makefile.in-133- else \ ############################################## gv-3.7.4/lib/Makefile.in-138- fi; \ gv-3.7.4/lib/Makefile.in:139: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ gv-3.7.4/lib/Makefile.in-140- done; \ ############################################## gv-3.7.4/lib/Makefile.in-672- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ gv-3.7.4/lib/Makefile.in:673: dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ gv-3.7.4/lib/Makefile.in-674- test "$$dir" != "$$p" || dir=.; \ ############################################## gv-3.7.4/lib/Makefile.in-704-.c.obj: gv-3.7.4/lib/Makefile.in:705:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` gv-3.7.4/lib/Makefile.in-706-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ############################################## gv-3.7.4/lib/Makefile.in-708-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ gv-3.7.4/lib/Makefile.in:709:@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` gv-3.7.4/lib/Makefile.in-710- ############################################## gv-3.7.4/lib/Makefile.in-725- dot_seen=no; \ gv-3.7.4/lib/Makefile.in:726: target=`echo $@ | sed s/-recursive//`; \ gv-3.7.4/lib/Makefile.in-727- list='$(SUBDIRS)'; for subdir in $$list; do \ ############################################## gv-3.7.4/lib/Makefile.in-760- rev="$$rev ."; \ gv-3.7.4/lib/Makefile.in:761: target=`echo $@ | sed s/-recursive//`; \ gv-3.7.4/lib/Makefile.in-762- for subdir in $$rev; do \ ############################################## gv-3.7.4/lib/Makefile.in-838-GTAGS: gv-3.7.4/lib/Makefile.in:839: here=`$(am__cd) $(top_builddir) && pwd` \ gv-3.7.4/lib/Makefile.in-840- && $(am__cd) $(top_srcdir) \ ############################################## gv-3.7.4/lib/Makefile.in-846-distdir: $(DISTFILES) gv-3.7.4/lib/Makefile.in:847: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/lib/Makefile.in:848: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/lib/Makefile.in-849- list='$(DISTFILES)'; \ ############################################## gv-3.7.4/lib/Makefile.in-860- if test -d $$d/$$file; then \ gv-3.7.4/lib/Makefile.in:861: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ gv-3.7.4/lib/Makefile.in-862- if test -d "$(distdir)/$$file"; then \ ############################################## gv-3.7.4/doc/mdate-sh-118-# Get the extended ls output of the file or directory. gv-3.7.4/doc/mdate-sh:119:set dummy x`eval "$ls_command \"\$save_arg1\""` gv-3.7.4/doc/mdate-sh-120- ############################################## gv-3.7.4/doc/mdate-sh-185- then gv-3.7.4/doc/mdate-sh:186: year=`expr $year - 1` gv-3.7.4/doc/mdate-sh-187- fi;; ############################################## gv-3.7.4/doc/texinfo.tex-5938- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 gv-3.7.4/doc/texinfo.tex:5939: \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 gv-3.7.4/doc/texinfo.tex-5940- \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie ############################################## gv-3.7.4/doc/Makefile.in-91-am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" gv-3.7.4/doc/Makefile.in:92:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; gv-3.7.4/doc/Makefile.in-93-am__vpath_adj = case $$p in \ gv-3.7.4/doc/Makefile.in:94: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ gv-3.7.4/doc/Makefile.in-95- *) f=$$p;; \ gv-3.7.4/doc/Makefile.in-96- esac; gv-3.7.4/doc/Makefile.in:97:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; gv-3.7.4/doc/Makefile.in-98-am__install_max = 40 gv-3.7.4/doc/Makefile.in-99-am__nobase_strip_setup = \ gv-3.7.4/doc/Makefile.in:100: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` gv-3.7.4/doc/Makefile.in-101-am__nobase_strip = \ ############################################## gv-3.7.4/doc/Makefile.in-608- $(am__cd) $(srcdir) && \ gv-3.7.4/doc/Makefile.in:609: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ gv-3.7.4/doc/Makefile.in-610- fi; \ ############################################## gv-3.7.4/doc/Makefile.in-641- @(dir=.; test -f ./gv.texi || dir=$(srcdir); \ gv-3.7.4/doc/Makefile.in:642: set `$(SHELL) $(srcdir)/mdate-sh $$dir/gv.texi`; \ gv-3.7.4/doc/Makefile.in-643- echo "@set UPDATED $$1 $$2 $$3"; \ ############################################## gv-3.7.4/doc/Makefile.in-686- for file in $$list; do \ gv-3.7.4/doc/Makefile.in:687: relfile=`echo "$$file" | sed 's|^.*/||'`; \ gv-3.7.4/doc/Makefile.in-688- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ ############################################## gv-3.7.4/doc/Makefile.in-695- for file in $$list; do \ gv-3.7.4/doc/Makefile.in:696: relfile=`echo "$$file" | sed 's|^.*/||'`; \ gv-3.7.4/doc/Makefile.in:697: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ gv-3.7.4/doc/Makefile.in-698- (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ ############################################## gv-3.7.4/doc/Makefile.in-722-dist-info: $(INFO_DEPS) gv-3.7.4/doc/Makefile.in:723: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ gv-3.7.4/doc/Makefile.in-724- list='$(INFO_DEPS)'; \ ############################################## gv-3.7.4/doc/Makefile.in-726- case $$base in \ gv-3.7.4/doc/Makefile.in:727: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ gv-3.7.4/doc/Makefile.in-728- esac; \ gv-3.7.4/doc/Makefile.in-729- if test -f $$base; then d=.; else d=$(srcdir); fi; \ gv-3.7.4/doc/Makefile.in:730: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ gv-3.7.4/doc/Makefile.in-731- for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ gv-3.7.4/doc/Makefile.in-732- if test -f $$file; then \ gv-3.7.4/doc/Makefile.in:733: relfile=`expr "$$file" : "$$d/\(.*\)"`; \ gv-3.7.4/doc/Makefile.in-734- test -f "$(distdir)/$$relfile" || \ ############################################## gv-3.7.4/doc/Makefile.in-749- @list='$(INFO_DEPS)'; for i in $$list; do \ gv-3.7.4/doc/Makefile.in:750: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ gv-3.7.4/doc/Makefile.in-751- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ ############################################## gv-3.7.4/doc/Makefile.in-812- else :; fi gv-3.7.4/doc/Makefile.in:813: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/doc/Makefile.in:814: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/doc/Makefile.in-815- list='$(DISTFILES)'; \ ############################################## gv-3.7.4/doc/Makefile.in-826- if test -d $$d/$$file; then \ gv-3.7.4/doc/Makefile.in:827: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ gv-3.7.4/doc/Makefile.in-828- if test -d "$(distdir)/$$file"; then \ ############################################## gv-3.7.4/doc/Makefile.in-942- test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" gv-3.7.4/doc/Makefile.in:943: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ gv-3.7.4/doc/Makefile.in-944- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ ############################################## gv-3.7.4/doc/Makefile.in-946- case $$file in \ gv-3.7.4/doc/Makefile.in:947: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ gv-3.7.4/doc/Makefile.in-948- esac; \ gv-3.7.4/doc/Makefile.in-949- if test -f $$file; then d=.; else d=$(srcdir); fi; \ gv-3.7.4/doc/Makefile.in:950: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ gv-3.7.4/doc/Makefile.in-951- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ ############################################## gv-3.7.4/doc/Makefile.in-965- for file in $$list; do \ gv-3.7.4/doc/Makefile.in:966: relfile=`echo "$$file" | sed 's|^.*/||'`; \ gv-3.7.4/doc/Makefile.in-967- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ ############################################## gv-3.7.4/m4/stdint.m4-339- fi gv-3.7.4/m4/stdint.m4:340: GLTYPE=`echo "$gltype" | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/m4/stdint.m4-341- AC_DEFINE_UNQUOTED([BITSIZEOF_${GLTYPE}], [$result]) ############################################## gv-3.7.4/m4/stdint.m4-368- eval result=\$gl_cv_type_${gltype}_signed gv-3.7.4/m4/stdint.m4:369: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/m4/stdint.m4-370- if test "$result" = yes; then ############################################## gv-3.7.4/m4/stdint.m4-422- done]) gv-3.7.4/m4/stdint.m4:423: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/m4/stdint.m4-424- eval result=\$gl_cv_type_${gltype}_suffix ############################################## gv-3.7.4/m4/gnulib-comp.m4-144- sed_drop_objext='s/\.o$//;s/\.obj$//' gv-3.7.4/m4/gnulib-comp.m4:145: for i in `for i in $gl_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do gv-3.7.4/m4/gnulib-comp.m4-146- gl_libobjs="$gl_libobjs $i.$ac_objext" ############################################## gv-3.7.4/m4/gnulib-comp.m4-162-changequote(,)dnl gv-3.7.4/m4/gnulib-comp.m4:163: gltests_WITNESS=IN_`echo "${PACKAGE-$PACKAGE_TARNAME}" | LC_ALL=C tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ | LC_ALL=C sed -e 's/[^A-Z0-9_]/_/g'`_GNULIB_TESTS gv-3.7.4/m4/gnulib-comp.m4-164-changequote([, ])dnl ############################################## gv-3.7.4/m4/gnulib-comp.m4-190- sed_drop_objext='s/\.o$//;s/\.obj$//' gv-3.7.4/m4/gnulib-comp.m4:191: for i in `for i in $gltests_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do gv-3.7.4/m4/gnulib-comp.m4-192- gltests_libobjs="$gltests_libobjs $i.$ac_objext" ############################################## gv-3.7.4/m4/getopt.m4-223- gl_awk_probe='BEGIN { if ("POSIXLY_CORRECT" in ENVIRON) print "x" }' gv-3.7.4/m4/getopt.m4:224: case ${POSIXLY_CORRECT+x}`$AWK "$gl_awk_probe" </dev/null` in gv-3.7.4/m4/getopt.m4-225- xx) gl_had_POSIXLY_CORRECT=exported ;; ############################################## gv-3.7.4/m4/00gnulib.m4-21- [AC][_DEFUN([$1], gv-3.7.4/m4/00gnulib.m4:22: [AC_REQUIRE([_gl_DEFUN_ONCE([$1])], gv-3.7.4/m4/00gnulib.m4-23- [m4_indir([_gl_DEFUN_ONCE([$1])])])])]dnl ############################################## gv-3.7.4/config.sub-59- gv-3.7.4/config.sub:60:me=`echo "$0" | sed -e 's,.*/,,'` gv-3.7.4/config.sub-61- ############################################## gv-3.7.4/config.sub-123-# Here we must recognize all the valid KERNEL-OS combinations. gv-3.7.4/config.sub:124:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` gv-3.7.4/config.sub-125-case $maybe_os in ############################################## gv-3.7.4/config.sub-130- os=-$maybe_os gv-3.7.4/config.sub:131: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` gv-3.7.4/config.sub-132- ;; gv-3.7.4/config.sub-133- *) gv-3.7.4/config.sub:134: basic_machine=`echo $1 | sed 's/-[^-]*$//'` gv-3.7.4/config.sub-135- if [ $basic_machine != $1 ] gv-3.7.4/config.sub:136: then os=`echo $1 | sed 's/.*-/-/'` gv-3.7.4/config.sub-137- else os=; fi ############################################## gv-3.7.4/config.sub-184- os=-sco5v6 gv-3.7.4/config.sub:185: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-186- ;; ############################################## gv-3.7.4/config.sub-188- os=-sco3.2v5 gv-3.7.4/config.sub:189: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-190- ;; ############################################## gv-3.7.4/config.sub-192- os=-sco3.2v4 gv-3.7.4/config.sub:193: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-194- ;; gv-3.7.4/config.sub-195- -sco3.2.[4-9]*) gv-3.7.4/config.sub:196: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` gv-3.7.4/config.sub:197: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-198- ;; ############################################## gv-3.7.4/config.sub-200- # Don't forget version if it is 3.2v4 or newer. gv-3.7.4/config.sub:201: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-202- ;; ############################################## gv-3.7.4/config.sub-204- # Don't forget version if it is 3.2v4 or newer. gv-3.7.4/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-206- ;; ############################################## gv-3.7.4/config.sub-208- os=-sco3.2v2 gv-3.7.4/config.sub:209: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-210- ;; gv-3.7.4/config.sub-211- -udk*) gv-3.7.4/config.sub:212: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-213- ;; ############################################## gv-3.7.4/config.sub-215- os=-isc2.2 gv-3.7.4/config.sub:216: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-217- ;; ############################################## gv-3.7.4/config.sub-221- -isc*) gv-3.7.4/config.sub:222: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` gv-3.7.4/config.sub-223- ;; ############################################## gv-3.7.4/config.sub-227- -ptx*) gv-3.7.4/config.sub:228: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` gv-3.7.4/config.sub-229- ;; gv-3.7.4/config.sub-230- -windowsnt*) gv-3.7.4/config.sub:231: os=`echo $os | sed -e 's/windowsnt/winnt/'` gv-3.7.4/config.sub-232- ;; ############################################## gv-3.7.4/config.sub-323- *-*-*) gv-3.7.4/config.sub:324: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 gv-3.7.4/config.sub-325- exit 1 ############################################## gv-3.7.4/config.sub-433- amd64-*) gv-3.7.4/config.sub:434: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-435- ;; ############################################## gv-3.7.4/config.sub-475- blackfin-*) gv-3.7.4/config.sub:476: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-477- os=-linux ############################################## gv-3.7.4/config.sub-678- i*86v32) gv-3.7.4/config.sub:679: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` gv-3.7.4/config.sub-680- os=-sysv32 ############################################## gv-3.7.4/config.sub-682- i*86v4*) gv-3.7.4/config.sub:683: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` gv-3.7.4/config.sub-684- os=-sysv4 ############################################## gv-3.7.4/config.sub-686- i*86v) gv-3.7.4/config.sub:687: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` gv-3.7.4/config.sub-688- os=-sysv ############################################## gv-3.7.4/config.sub-690- i*86sol2) gv-3.7.4/config.sub:691: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` gv-3.7.4/config.sub-692- os=-solaris2 ############################################## gv-3.7.4/config.sub-720- m68knommu-*) gv-3.7.4/config.sub:721: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-722- os=-linux ############################################## gv-3.7.4/config.sub-753- mips3*-*) gv-3.7.4/config.sub:754: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` gv-3.7.4/config.sub-755- ;; gv-3.7.4/config.sub-756- mips3*) gv-3.7.4/config.sub:757: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown gv-3.7.4/config.sub-758- ;; ############################################## gv-3.7.4/config.sub-771- ms1-*) gv-3.7.4/config.sub:772: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` gv-3.7.4/config.sub-773- ;; ############################################## gv-3.7.4/config.sub-876- parisc-*) gv-3.7.4/config.sub:877: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-878- os=-linux ############################################## gv-3.7.4/config.sub-892- pc98-*) gv-3.7.4/config.sub:893: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-894- ;; ############################################## gv-3.7.4/config.sub-907- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) gv-3.7.4/config.sub:908: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-909- ;; gv-3.7.4/config.sub-910- pentiumpro-* | p6-* | 6x86-* | athlon-*) gv-3.7.4/config.sub:911: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-912- ;; gv-3.7.4/config.sub-913- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) gv-3.7.4/config.sub:914: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-915- ;; gv-3.7.4/config.sub-916- pentium4-*) gv-3.7.4/config.sub:917: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-918- ;; ############################################## gv-3.7.4/config.sub-925- ;; gv-3.7.4/config.sub:926: ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-927- ;; ############################################## gv-3.7.4/config.sub-931- ppcle-* | powerpclittle-*) gv-3.7.4/config.sub:932: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-933- ;; ############################################## gv-3.7.4/config.sub-935- ;; gv-3.7.4/config.sub:936: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-937- ;; ############################################## gv-3.7.4/config.sub-941- ppc64le-* | powerpc64little-*) gv-3.7.4/config.sub:942: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` gv-3.7.4/config.sub-943- ;; ############################################## gv-3.7.4/config.sub-1233- *) gv-3.7.4/config.sub:1234: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 gv-3.7.4/config.sub-1235- exit 1 ############################################## gv-3.7.4/config.sub-1241- *-digital*) gv-3.7.4/config.sub:1242: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` gv-3.7.4/config.sub-1243- ;; gv-3.7.4/config.sub-1244- *-commodore*) gv-3.7.4/config.sub:1245: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` gv-3.7.4/config.sub-1246- ;; ############################################## gv-3.7.4/config.sub-1262- -solaris1 | -solaris1.*) gv-3.7.4/config.sub:1263: os=`echo $os | sed -e 's|solaris1|sunos4|'` gv-3.7.4/config.sub-1264- ;; ############################################## gv-3.7.4/config.sub-1274- -gnu/linux*) gv-3.7.4/config.sub:1275: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` gv-3.7.4/config.sub-1276- ;; ############################################## gv-3.7.4/config.sub-1319- -nto*) gv-3.7.4/config.sub:1320: os=`echo $os | sed -e 's|nto|nto-qnx|'` gv-3.7.4/config.sub-1321- ;; ############################################## gv-3.7.4/config.sub-1326- -mac*) gv-3.7.4/config.sub:1327: os=`echo $os | sed -e 's|mac|macos|'` gv-3.7.4/config.sub-1328- ;; ############################################## gv-3.7.4/config.sub-1332- -linux*) gv-3.7.4/config.sub:1333: os=`echo $os | sed -e 's|linux|linux-gnu|'` gv-3.7.4/config.sub-1334- ;; gv-3.7.4/config.sub-1335- -sunos5*) gv-3.7.4/config.sub:1336: os=`echo $os | sed -e 's|sunos5|solaris2|'` gv-3.7.4/config.sub-1337- ;; gv-3.7.4/config.sub-1338- -sunos6*) gv-3.7.4/config.sub:1339: os=`echo $os | sed -e 's|sunos6|solaris3|'` gv-3.7.4/config.sub-1340- ;; ############################################## gv-3.7.4/config.sub-1387- -sinix5.*) gv-3.7.4/config.sub:1388: os=`echo $os | sed -e 's|sinix|sysv|'` gv-3.7.4/config.sub-1389- ;; ############################################## gv-3.7.4/config.sub-1441- # Get rid of the `-' at the beginning of $os. gv-3.7.4/config.sub:1442: os=`echo $os | sed 's/[^-]*-//'` gv-3.7.4/config.sub:1443: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 gv-3.7.4/config.sub-1444- exit 1 ############################################## gv-3.7.4/config.sub-1692- esac gv-3.7.4/config.sub:1693: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` gv-3.7.4/config.sub-1694- ;; ############################################## gv-3.7.4/missing-139- # Could not run --version or --help. This is probably someone gv-3.7.4/missing:140: # running `$TOOL --version' or `$TOOL --help' to check whether gv-3.7.4/missing-141- # $TOOL exists and not knowing $TOOL uses missing. ############################################## gv-3.7.4/missing-173- from any GNU archive site." gv-3.7.4/missing:174: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` gv-3.7.4/missing-175- test -z "$files" && files="config.h" ############################################## gv-3.7.4/missing-202- proper tools for further handling them. gv-3.7.4/missing:203: You can get \`$1' as part of \`Autoconf' from any GNU gv-3.7.4/missing-204- archive site." gv-3.7.4/missing-205- gv-3.7.4/missing:206: file=`echo "$*" | sed -n "$sed_output"` gv-3.7.4/missing:207: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` gv-3.7.4/missing-208- if test -f "$file"; then ############################################## gv-3.7.4/missing-231- *.y) gv-3.7.4/missing:232: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` gv-3.7.4/missing-233- if test -f "$SRCFILE"; then ############################################## gv-3.7.4/missing-235- fi gv-3.7.4/missing:236: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` gv-3.7.4/missing-237- if test -f "$SRCFILE"; then ############################################## gv-3.7.4/missing-261- *.l) gv-3.7.4/missing:262: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` gv-3.7.4/missing-263- if test -f "$SRCFILE"; then ############################################## gv-3.7.4/missing-280- gv-3.7.4/missing:281: file=`echo "$*" | sed -n "$sed_output"` gv-3.7.4/missing:282: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` gv-3.7.4/missing-283- if test -f "$file"; then ############################################## gv-3.7.4/missing-300- # The file to touch is that specified with -o ... gv-3.7.4/missing:301: file=`echo "$*" | sed -n "$sed_output"` gv-3.7.4/missing:302: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` gv-3.7.4/missing-303- if test -z "$file"; then gv-3.7.4/missing-304- # ... or it is the one specified with @setfilename ... gv-3.7.4/missing:305: infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` gv-3.7.4/missing-306- file=`sed -n ' ############################################## gv-3.7.4/missing-312- # ... or it is derived from the source name (dir/f.texi becomes f.info) gv-3.7.4/missing:313: test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info gv-3.7.4/missing-314- fi ############################################## gv-3.7.4/missing-336- *o*) gv-3.7.4/missing:337: firstarg=`echo "$firstarg" | sed s/o//` gv-3.7.4/missing-338- tar "$firstarg" "$@" && exit 0 ############################################## gv-3.7.4/missing-342- *h*) gv-3.7.4/missing:343: firstarg=`echo "$firstarg" | sed s/h//` gv-3.7.4/missing-344- tar "$firstarg" "$@" && exit 0 ############################################## gv-3.7.4/Makefile.in-110- while test -n "$$dir1"; do \ gv-3.7.4/Makefile.in:111: first=`echo "$$dir1" | sed -e "$$sed_first"`; \ gv-3.7.4/Makefile.in-112- if test "$$first" != "."; then \ gv-3.7.4/Makefile.in-113- if test "$$first" = ".."; then \ gv-3.7.4/Makefile.in:114: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ gv-3.7.4/Makefile.in:115: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ gv-3.7.4/Makefile.in-116- else \ gv-3.7.4/Makefile.in:117: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ gv-3.7.4/Makefile.in-118- if test "$$first2" = "$$first"; then \ gv-3.7.4/Makefile.in:119: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ gv-3.7.4/Makefile.in-120- else \ ############################################## gv-3.7.4/Makefile.in-125- fi; \ gv-3.7.4/Makefile.in:126: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ gv-3.7.4/Makefile.in-127- done; \ ############################################## gv-3.7.4/Makefile.in-623- dot_seen=no; \ gv-3.7.4/Makefile.in:624: target=`echo $@ | sed s/-recursive//`; \ gv-3.7.4/Makefile.in-625- list='$(SUBDIRS)'; for subdir in $$list; do \ ############################################## gv-3.7.4/Makefile.in-658- rev="$$rev ."; \ gv-3.7.4/Makefile.in:659: target=`echo $@ | sed s/-recursive//`; \ gv-3.7.4/Makefile.in-660- for subdir in $$rev; do \ ############################################## gv-3.7.4/Makefile.in-736-GTAGS: gv-3.7.4/Makefile.in:737: here=`$(am__cd) $(top_builddir) && pwd` \ gv-3.7.4/Makefile.in-738- && $(am__cd) $(top_srcdir) \ ############################################## gv-3.7.4/Makefile.in-746- test -d "$(distdir)" || mkdir "$(distdir)" gv-3.7.4/Makefile.in:747: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/Makefile.in:748: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/Makefile.in-749- list='$(DISTFILES)'; \ ############################################## gv-3.7.4/Makefile.in-760- if test -d $$d/$$file; then \ gv-3.7.4/Makefile.in:761: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ gv-3.7.4/Makefile.in-762- if test -d "$(distdir)/$$file"; then \ ############################################## gv-3.7.4/Makefile.in-868- test -d $(distdir)/_build || exit 0; \ gv-3.7.4/Makefile.in:869: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ gv-3.7.4/Makefile.in-870- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ############################################## gv-3.7.4/Makefile.in-902- @$(am__cd) '$(distuninstallcheck_dir)' \ gv-3.7.4/Makefile.in:903: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ gv-3.7.4/Makefile.in-904- || { echo "ERROR: files left after uninstall:" ; \ ############################################## gv-3.7.4/Makefile.in-914- fi gv-3.7.4/Makefile.in:915: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ gv-3.7.4/Makefile.in-916- || { echo "ERROR: files left in build directory after distclean:" ; \ ############################################## gv-3.7.4/config.guess-40- gv-3.7.4/config.guess:41:me=`echo "$0" | sed -e 's,.*/,,'` gv-3.7.4/config.guess-42- ############################################## gv-3.7.4/config.guess-109-: ${TMPDIR=/tmp} ; gv-3.7.4/config.guess:110: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || gv-3.7.4/config.guess-111- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ############################################## gv-3.7.4/config.guess-195- *) gv-3.7.4/config.guess:196: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` gv-3.7.4/config.guess-197- ;; ############################################## gv-3.7.4/config.guess-222- *4.0) gv-3.7.4/config.guess:223: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` gv-3.7.4/config.guess-224- ;; gv-3.7.4/config.guess-225- *5.*) gv-3.7.4/config.guess:226: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` gv-3.7.4/config.guess-227- ;; ############################################## gv-3.7.4/config.guess-232- # types through head -n 1, so we only detect the type of CPU 0. gv-3.7.4/config.guess:233: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` gv-3.7.4/config.guess-234- case "$ALPHA_CPU_TYPE" in ############################################## gv-3.7.4/config.guess-270- # 1.2 uses "1.2" for uname -r. gv-3.7.4/config.guess:271: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` gv-3.7.4/config.guess-272- exit ;; ############################################## gv-3.7.4/config.guess-327- s390x:SunOS:*:*) gv-3.7.4/config.guess:328: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` gv-3.7.4/config.guess-329- exit ;; gv-3.7.4/config.guess-330- sun4H:SunOS:5.*:*) gv-3.7.4/config.guess:331: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` gv-3.7.4/config.guess-332- exit ;; gv-3.7.4/config.guess-333- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) gv-3.7.4/config.guess:334: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` gv-3.7.4/config.guess-335- exit ;; ############################################## gv-3.7.4/config.guess-352- fi gv-3.7.4/config.guess:353: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` gv-3.7.4/config.guess-354- exit ;; ############################################## gv-3.7.4/config.guess-358- # it's likely to be more like Solaris than SunOS4. gv-3.7.4/config.guess:359: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` gv-3.7.4/config.guess-360- exit ;; ############################################## gv-3.7.4/config.guess-367- # Japanese Language versions have a version number like `4.1.3-JL'. gv-3.7.4/config.guess:368: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` gv-3.7.4/config.guess-369- exit ;; ############################################## gv-3.7.4/config.guess-373- sun*:*:4.2BSD:*) gv-3.7.4/config.guess:374: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` gv-3.7.4/config.guess-375- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 ############################################## gv-3.7.4/config.guess-455- $CC_FOR_BUILD -o $dummy $dummy.c && gv-3.7.4/config.guess:456: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && gv-3.7.4/config.guess:457: SYSTEM_NAME=`$dummy $dummyarg` && gv-3.7.4/config.guess-458- { echo "$SYSTEM_NAME"; exit; } ############################################## gv-3.7.4/config.guess-511- *:IRIX*:*:*) gv-3.7.4/config.guess:512: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` gv-3.7.4/config.guess-513- exit ;; ############################################## gv-3.7.4/config.guess-541-EOF gv-3.7.4/config.guess:542: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` gv-3.7.4/config.guess-543- then ############################################## gv-3.7.4/config.guess-554- *:AIX:*:[456]) gv-3.7.4/config.guess:555: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` gv-3.7.4/config.guess-556- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then ############################################## gv-3.7.4/config.guess-589- 9000/[34678]??:HP-UX:*:*) gv-3.7.4/config.guess:590: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` gv-3.7.4/config.guess-591- case "${UNAME_MACHINE}" in ############################################## gv-3.7.4/config.guess-643-EOF gv-3.7.4/config.guess:644: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` gv-3.7.4/config.guess-645- test -z "$HP_ARCH" && HP_ARCH=hppa ############################################## gv-3.7.4/config.guess-671- ia64:HP-UX:*:*) gv-3.7.4/config.guess:672: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` gv-3.7.4/config.guess-673- echo ia64-hp-hpux${HPUX_REV} ############################################## gv-3.7.4/config.guess-701-EOF gv-3.7.4/config.guess:702: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && gv-3.7.4/config.guess-703- { echo "$SYSTEM_NAME"; exit; } ############################################## gv-3.7.4/config.guess-772- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` gv-3.7.4/config.guess:773: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` gv-3.7.4/config.guess-774- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## gv-3.7.4/config.guess-777- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` gv-3.7.4/config.guess:778: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` gv-3.7.4/config.guess-779- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## gv-3.7.4/config.guess-792- pc98) gv-3.7.4/config.guess:793: echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; gv-3.7.4/config.guess-794- amd64) gv-3.7.4/config.guess:795: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; gv-3.7.4/config.guess-796- *) gv-3.7.4/config.guess:797: echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; gv-3.7.4/config.guess-798- esac ############################################## gv-3.7.4/config.guess-846- prep*:SunOS:5.*:*) gv-3.7.4/config.guess:847: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` gv-3.7.4/config.guess-848- exit ;; ############################################## gv-3.7.4/config.guess-850- # the GNU system gv-3.7.4/config.guess:851: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` gv-3.7.4/config.guess-852- exit ;; ############################################## gv-3.7.4/config.guess-854- # other systems with GNU libc and userland gv-3.7.4/config.guess:855: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu gv-3.7.4/config.guess-856- exit ;; ############################################## gv-3.7.4/config.guess-903-EOF gv-3.7.4/config.guess:904: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` gv-3.7.4/config.guess-905- echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ############################################## gv-3.7.4/config.guess-931-EOF gv-3.7.4/config.guess:932: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` gv-3.7.4/config.guess-933- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ############################################## gv-3.7.4/config.guess-1013- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) gv-3.7.4/config.guess:1014: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` gv-3.7.4/config.guess-1015- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then ############################################## gv-3.7.4/config.guess-1280- *:DragonFly:*:*) gv-3.7.4/config.guess:1281: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` gv-3.7.4/config.guess-1282- exit ;; ############################################## gv-3.7.4/config.guess-1293- i*86:skyos:*:*) gv-3.7.4/config.guess:1294: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' gv-3.7.4/config.guess-1295- exit ;; ############################################## gv-3.7.4/config.guess-1421- gv-3.7.4/config.guess:1422:$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && gv-3.7.4/config.guess-1423- { echo "$SYSTEM_NAME"; exit; } ############################################## gv-3.7.4/install-sh-217- fi gv-3.7.4/install-sh:218: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; gv-3.7.4/install-sh-219- *) ############################################## gv-3.7.4/install-sh-269- dstdir=$dst gv-3.7.4/install-sh:270: dst=$dstdir/`basename "$src"` gv-3.7.4/install-sh-271- dstdir_status=0 ############################################## gv-3.7.4/install-sh-351- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. gv-3.7.4/install-sh:352: ls_ld_tmpdir=`ls -ld "$tmpdir"` gv-3.7.4/install-sh-353- case $ls_ld_tmpdir in ############################################## gv-3.7.4/install-sh-358- $mkdirprog -m$different_mode -p -- "$tmpdir" && { gv-3.7.4/install-sh:359: ls_ld_tmpdir_1=`ls -ld "$tmpdir"` gv-3.7.4/install-sh-360- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" ############################################## gv-3.7.4/install-sh-418- case $prefix in gv-3.7.4/install-sh:419: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; gv-3.7.4/install-sh-420- *) qprefix=$prefix;; ############################################## gv-3.7.4/install-sh-467- if $copy_on_change && gv-3.7.4/install-sh:468: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && gv-3.7.4/install-sh:469: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && gv-3.7.4/install-sh-470- ############################################## gv-3.7.4/INSTALL-173-directory configuration variables that were expressed in terms of gv-3.7.4/INSTALL:174:`${prefix}'. Any directories that were specified during `configure', gv-3.7.4/INSTALL-175-but not in terms of `${prefix}', must each be overridden at install ############################################## gv-3.7.4/src/Makefile.in-127- $@ gv-3.7.4/src/Makefile.in:128:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; gv-3.7.4/src/Makefile.in-129-am__vpath_adj = case $$p in \ gv-3.7.4/src/Makefile.in:130: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ gv-3.7.4/src/Makefile.in-131- *) f=$$p;; \ gv-3.7.4/src/Makefile.in-132- esac; gv-3.7.4/src/Makefile.in:133:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; gv-3.7.4/src/Makefile.in-134-am__install_max = 40 gv-3.7.4/src/Makefile.in-135-am__nobase_strip_setup = \ gv-3.7.4/src/Makefile.in:136: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` gv-3.7.4/src/Makefile.in-137-am__nobase_strip = \ ############################################## gv-3.7.4/src/Makefile.in-838-.c.obj: gv-3.7.4/src/Makefile.in:839:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` gv-3.7.4/src/Makefile.in-840-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ############################################## gv-3.7.4/src/Makefile.in-842-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ gv-3.7.4/src/Makefile.in:843:@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` gv-3.7.4/src/Makefile.in-844-install-appdefaultsDATA: $(appdefaults_DATA) ############################################## gv-3.7.4/src/Makefile.in-859- @list='$(appdefaults_DATA)'; test -n "$(appdefaultsdir)" || list=; \ gv-3.7.4/src/Makefile.in:860: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ gv-3.7.4/src/Makefile.in-861- test -n "$$files" || exit 0; \ ############################################## gv-3.7.4/src/Makefile.in-879- @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ gv-3.7.4/src/Makefile.in:880: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ gv-3.7.4/src/Makefile.in-881- test -n "$$files" || exit 0; \ ############################################## gv-3.7.4/src/Makefile.in-929-GTAGS: gv-3.7.4/src/Makefile.in:930: here=`$(am__cd) $(top_builddir) && pwd` \ gv-3.7.4/src/Makefile.in-931- && $(am__cd) $(top_srcdir) \ ############################################## gv-3.7.4/src/Makefile.in-937-distdir: $(DISTFILES) gv-3.7.4/src/Makefile.in:938: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/src/Makefile.in:939: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ gv-3.7.4/src/Makefile.in-940- list='$(DISTFILES)'; \ ############################################## gv-3.7.4/src/Makefile.in-951- if test -d $$d/$$file; then \ gv-3.7.4/src/Makefile.in:952: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ gv-3.7.4/src/Makefile.in-953- if test -d "$(distdir)/$$file"; then \ ############################################## gv-3.7.4/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \ gv-3.7.4/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then gv-3.7.4/configure-47- as_echo='print -r --' gv-3.7.4/configure-48- as_echo_n='print -rn --' gv-3.7.4/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then gv-3.7.4/configure-50- as_echo='printf %s\n' ############################################## gv-3.7.4/configure-52-else gv-3.7.4/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then gv-3.7.4/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## gv-3.7.4/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl"; gv-3.7.4/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; gv-3.7.4/configure-64- esac; ############################################## gv-3.7.4/configure-172- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && gv-3.7.4/configure:173: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 gv-3.7.4/configure-174-test \$(( 1 + 1 )) = 2 || exit 1" ############################################## gv-3.7.4/configure-288- case $as_dir in #( gv-3.7.4/configure:289: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( gv-3.7.4/configure-290- *) as_qdir=$as_dir;; ############################################## gv-3.7.4/configure-353- { gv-3.7.4/configure:354: as_val=`expr "$@" || test $? -eq 1` gv-3.7.4/configure-355- } ############################################## gv-3.7.4/configure-360-# --------------------------------- gv-3.7.4/configure:361:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are gv-3.7.4/configure-362-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## gv-3.7.4/configure-423- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && gv-3.7.4/configure:424: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { gv-3.7.4/configure-425- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ############################################## gv-3.7.4/configure-514- esac; gv-3.7.4/configure:515: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( gv-3.7.4/configure-516- ???[sx]*):;;*)false;;esac;fi ############################################## gv-3.7.4/configure-1154- case $ac_option in gv-3.7.4/configure:1155: *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; gv-3.7.4/configure-1156- *) ac_optarg=yes ;; ############################################## gv-3.7.4/configure-1197- -disable-* | --disable-*) gv-3.7.4/configure:1198: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` gv-3.7.4/configure-1199- # Reject names that are not valid shell variable names. ############################################## gv-3.7.4/configure-1202- ac_useropt_orig=$ac_useropt gv-3.7.4/configure:1203: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` gv-3.7.4/configure-1204- case $ac_user_opts in ############################################## gv-3.7.4/configure-1223- -enable-* | --enable-*) gv-3.7.4/configure:1224: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` gv-3.7.4/configure-1225- # Reject names that are not valid shell variable names. ############################################## gv-3.7.4/configure-1228- ac_useropt_orig=$ac_useropt gv-3.7.4/configure:1229: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` gv-3.7.4/configure-1230- case $ac_user_opts in ############################################## gv-3.7.4/configure-1427- -with-* | --with-*) gv-3.7.4/configure:1428: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` gv-3.7.4/configure-1429- # Reject names that are not valid shell variable names. ############################################## gv-3.7.4/configure-1432- ac_useropt_orig=$ac_useropt gv-3.7.4/configure:1433: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` gv-3.7.4/configure-1434- case $ac_user_opts in ############################################## gv-3.7.4/configure-1443- -without-* | --without-*) gv-3.7.4/configure:1444: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` gv-3.7.4/configure-1445- # Reject names that are not valid shell variable names. ############################################## gv-3.7.4/configure-1448- ac_useropt_orig=$ac_useropt gv-3.7.4/configure:1449: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` gv-3.7.4/configure-1450- case $ac_user_opts in ############################################## gv-3.7.4/configure-1481- *=*) gv-3.7.4/configure:1482: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` gv-3.7.4/configure-1483- # Reject names that are not valid shell variable names. ############################################## gv-3.7.4/configure-1502-if test -n "$ac_prev"; then gv-3.7.4/configure:1503: ac_option=--`echo $ac_prev | sed 's/_/-/g'` gv-3.7.4/configure-1504- as_fn_error "missing argument to $ac_option" ############################################## gv-3.7.4/configure-1524- */ ) gv-3.7.4/configure:1525: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` gv-3.7.4/configure-1526- eval $ac_var=\$ac_val;; ############################################## gv-3.7.4/configure-1561-ac_ls_di=`ls -di .` && gv-3.7.4/configure:1562:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || gv-3.7.4/configure-1563- as_fn_error "working directory cannot be determined" ############################################## gv-3.7.4/configure-1617-case $srcdir in gv-3.7.4/configure:1618:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; gv-3.7.4/configure-1619-esac ############################################## gv-3.7.4/configure-1660-By default, \`make install' will install all the files in gv-3.7.4/configure:1661:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify gv-3.7.4/configure:1662:an installation prefix other than \`$ac_default_prefix' using \`--prefix', gv-3.7.4/configure-1663-for instance \`--prefix=\$HOME'. ############################################## gv-3.7.4/configure-1796-*) gv-3.7.4/configure:1797: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` gv-3.7.4/configure-1798- # A ".." for each directory in $ac_dir_suffix. gv-3.7.4/configure:1799: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` gv-3.7.4/configure-1800- case $ac_top_builddir_sub in ############################################## gv-3.7.4/configure-2608- *\'*) gv-3.7.4/configure:2609: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; gv-3.7.4/configure-2610- esac ############################################## gv-3.7.4/configure-2695- case $ac_val in gv-3.7.4/configure:2696: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; gv-3.7.4/configure-2697- esac ############################################## gv-3.7.4/configure-2712- case $ac_val in gv-3.7.4/configure:2713: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; gv-3.7.4/configure-2714- esac ############################################## gv-3.7.4/configure-2842- set,) gv-3.7.4/configure:2843: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 gv-3.7.4/configure:2844:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} gv-3.7.4/configure-2845- ac_cache_corrupted=: ;; ############################################## gv-3.7.4/configure-2853- # differences in whitespace do not lead to failure. gv-3.7.4/configure:2854: ac_old_val_w=`echo x $ac_old_val` gv-3.7.4/configure:2855: ac_new_val_w=`echo x $ac_new_val` gv-3.7.4/configure-2856- if test "$ac_old_val_w" != "$ac_new_val_w"; then ############################################## gv-3.7.4/configure-2873- case $ac_new_val in gv-3.7.4/configure:2874: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; gv-3.7.4/configure-2875- *) ac_arg=$ac_var=$ac_new_val ;; ############################################## gv-3.7.4/configure-3042-if ( gv-3.7.4/configure:3043: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` gv-3.7.4/configure-3044- if test "$*" = "X"; then gv-3.7.4/configure-3045- # -L didn't work. gv-3.7.4/configure:3046: set X `ls -t "$srcdir/configure" conftest.file` gv-3.7.4/configure-3047- fi ############################################## gv-3.7.4/configure-3078-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' gv-3.7.4/configure:3079:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` gv-3.7.4/configure-3080- gv-3.7.4/configure-3081-# expand $ac_aux_dir to an absolute path gv-3.7.4/configure:3082:am_aux_dir=`cd $ac_aux_dir && pwd` gv-3.7.4/configure-3083- ############################################## gv-3.7.4/configure-3223- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue gv-3.7.4/configure:3224: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( gv-3.7.4/configure-3225- 'mkdir (GNU coreutils) '* | \ ############################################## gv-3.7.4/configure-3303-set x ${MAKE-make} gv-3.7.4/configure:3304:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` gv-3.7.4/configure-3305-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : ############################################## gv-3.7.4/configure-3313-# GNU make sometimes prints "make[1]: Entering...", which would confuse us. gv-3.7.4/configure:3314:case `${MAKE-make} -f conftest.make 2>/dev/null` in gv-3.7.4/configure-3315- *@@@%%%=?*=@@@%%%*) ############################################## gv-3.7.4/configure-3340- gv-3.7.4/configure:3341:if test "`cd $srcdir && pwd`" != "`pwd`"; then gv-3.7.4/configure-3342- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## gv-3.7.4/configure-3787-$as_echo_n "checking whether the C compiler works... " >&6; } gv-3.7.4/configure:3788:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` gv-3.7.4/configure-3789- ############################################## gv-3.7.4/configure-3831- then :; else gv-3.7.4/configure:3832: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` gv-3.7.4/configure-3833- fi ############################################## gv-3.7.4/configure-3892- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; gv-3.7.4/configure:3893: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` gv-3.7.4/configure-3894- break;; ############################################## gv-3.7.4/configure-4001- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; gv-3.7.4/configure:4002: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` gv-3.7.4/configure-4003- break;; ############################################## gv-3.7.4/configure-4251-# Ignore all kinds of additional output from `make'. gv-3.7.4/configure:4252:case `$am_make -s -f confmf 2> /dev/null` in #( gv-3.7.4/configure-4253-*the\ am__doit\ target*) ############################################## gv-3.7.4/configure-4261- echo '.include "confinc"' > confmf gv-3.7.4/configure:4262: case `$am_make -s -f confmf 2> /dev/null` in #( gv-3.7.4/configure-4263- *the\ am__doit\ target*) ############################################## gv-3.7.4/configure-4322- if test "$am_compiler_list" = ""; then gv-3.7.4/configure:4323: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` gv-3.7.4/configure-4324- fi ############################################## gv-3.7.4/configure-4524-test "x$ac_build_alias" = x && gv-3.7.4/configure:4525: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` gv-3.7.4/configure-4526-test "x$ac_build_alias" = x && gv-3.7.4/configure-4527- as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 gv-3.7.4/configure:4528:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || gv-3.7.4/configure-4529- as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 ############################################## gv-3.7.4/configure-4548-IFS=$ac_save_IFS gv-3.7.4/configure:4549:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac gv-3.7.4/configure-4550- ############################################## gv-3.7.4/configure-4559-else gv-3.7.4/configure:4560: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || gv-3.7.4/configure-4561- as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 ############################################## gv-3.7.4/configure-4581-IFS=$ac_save_IFS gv-3.7.4/configure:4582:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac gv-3.7.4/configure-4583- ############################################## gv-3.7.4/configure-4742- # Check for GNU $ac_path_GREP gv-3.7.4/configure:4743:case `"$ac_path_GREP" --version 2>&1` in gv-3.7.4/configure-4744-*GNU*) ############################################## gv-3.7.4/configure-4808- # Check for GNU $ac_path_EGREP gv-3.7.4/configure:4809:case `"$ac_path_EGREP" --version 2>&1` in gv-3.7.4/configure-4810-*GNU*) ############################################## gv-3.7.4/configure-4969-do : gv-3.7.4/configure:4970: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` gv-3.7.4/configure-4971-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ############################################## gv-3.7.4/configure-4975- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:4976:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 gv-3.7.4/configure-4977-_ACEOF ############################################## gv-3.7.4/configure-5234- for ac_func in _getb67 GETB67 getb67; do gv-3.7.4/configure:5235: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` gv-3.7.4/configure-5236-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ############################################## gv-3.7.4/configure-5305-do : gv-3.7.4/configure:5306: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` gv-3.7.4/configure-5307-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ############################################## gv-3.7.4/configure-5310- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:5311:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 gv-3.7.4/configure-5312-_ACEOF ############################################## gv-3.7.4/configure-5450-do : gv-3.7.4/configure:5451: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` gv-3.7.4/configure-5452-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ############################################## gv-3.7.4/configure-5455- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:5456:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 gv-3.7.4/configure-5457-_ACEOF ############################################## gv-3.7.4/configure-6411- gl_awk_probe='BEGIN { if ("POSIXLY_CORRECT" in ENVIRON) print "x" }' gv-3.7.4/configure:6412: case ${POSIXLY_CORRECT+x}`$AWK "$gl_awk_probe" </dev/null` in gv-3.7.4/configure-6413- xx) gl_had_POSIXLY_CORRECT=exported ;; ############################################## gv-3.7.4/configure-6749- for gl_func in gettimeofday; do gv-3.7.4/configure:6750: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-6751- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-6785- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:6786:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-6787-_ACEOF ############################################## gv-3.7.4/configure-7362-do : gv-3.7.4/configure:7363: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` gv-3.7.4/configure-7364-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ############################################## gv-3.7.4/configure-7367- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:7368:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 gv-3.7.4/configure-7369-_ACEOF ############################################## gv-3.7.4/configure-7425- fi gv-3.7.4/configure:7426: GLTYPE=`echo "$gltype" | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-7427- cat >>confdefs.h <<_ACEOF ############################################## gv-3.7.4/configure-7470- fi gv-3.7.4/configure:7471: GLTYPE=`echo "$gltype" | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-7472- cat >>confdefs.h <<_ACEOF ############################################## gv-3.7.4/configure-7522- eval result=\$gl_cv_type_${gltype}_signed gv-3.7.4/configure:7523: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-7524- if test "$result" = yes; then ############################################## gv-3.7.4/configure-7598-$as_echo "$ac_res" >&6; } gv-3.7.4/configure:7599: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-7600- eval result=\$gl_cv_type_${gltype}_suffix ############################################## gv-3.7.4/configure-7670-$as_echo "$ac_res" >&6; } gv-3.7.4/configure:7671: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-7672- eval result=\$gl_cv_type_${gltype}_suffix ############################################## gv-3.7.4/configure-7802- for gl_func in imaxabs imaxdiv strtoimax strtoumax; do gv-3.7.4/configure:7803: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-7804- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-7834- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:7835:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-7836-_ACEOF ############################################## gv-3.7.4/configure-9524- for gl_func in imaxabs imaxdiv strtoimax strtoumax; do gv-3.7.4/configure:9525: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-9526- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-9556- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:9557:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-9558-_ACEOF ############################################## gv-3.7.4/configure-9989- for gl_func in sigaction sigaddset sigdelset sigemptyset sigfillset sigismember sigpending sigprocmask; do gv-3.7.4/configure:9990: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-9991- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-10021- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:10022:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-10023-_ACEOF ############################################## gv-3.7.4/configure-10680-do : gv-3.7.4/configure:10681: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` gv-3.7.4/configure-10682-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ############################################## gv-3.7.4/configure-10685- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:10686:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 gv-3.7.4/configure-10687-_ACEOF ############################################## gv-3.7.4/configure-10743- fi gv-3.7.4/configure:10744: GLTYPE=`echo "$gltype" | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-10745- cat >>confdefs.h <<_ACEOF ############################################## gv-3.7.4/configure-10788- fi gv-3.7.4/configure:10789: GLTYPE=`echo "$gltype" | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-10790- cat >>confdefs.h <<_ACEOF ############################################## gv-3.7.4/configure-10840- eval result=\$gl_cv_type_${gltype}_signed gv-3.7.4/configure:10841: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-10842- if test "$result" = yes; then ############################################## gv-3.7.4/configure-10916-$as_echo "$ac_res" >&6; } gv-3.7.4/configure:10917: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-10918- eval result=\$gl_cv_type_${gltype}_suffix ############################################## gv-3.7.4/configure-10988-$as_echo "$ac_res" >&6; } gv-3.7.4/configure:10989: GLTYPE=`echo $gltype | tr 'abcdefghijklmnopqrstuvwxyz ' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'` gv-3.7.4/configure-10990- eval result=\$gl_cv_type_${gltype}_suffix ############################################## gv-3.7.4/configure-11070- for gl_func in _Exit atoll canonicalize_file_name getloadavg getsubopt grantpt mkdtemp mkostemp mkostemps mkstemp mkstemps ptsname random_r initstat_r srandom_r setstate_r realpath rpmatch setenv strtod strtoll strtoull unlockpt unsetenv; do gv-3.7.4/configure:11071: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-11072- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-11108- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:11109:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-11110-_ACEOF ############################################## gv-3.7.4/configure-11204- for gl_func in fchmodat fstatat futimens lchmod lstat mkdirat mkfifo mkfifoat mknod mknodat stat utimensat; do gv-3.7.4/configure:11205: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-11206- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-11236- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:11237:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-11238-_ACEOF ############################################## gv-3.7.4/configure-11348- for gl_func in chown dup2 dup3 environ euidaccess faccessat fchdir fchownat fsync ftruncate getcwd getdomainname getdtablesize getgroups gethostname getlogin getlogin_r getpagesize getusershell setusershell endusershell lchown link linkat lseek pipe pipe2 pread pwrite readlink readlinkat rmdir sleep symlink symlinkat ttyname_r unlink unlinkat usleep; do gv-3.7.4/configure:11349: as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh` gv-3.7.4/configure-11350- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5 ############################################## gv-3.7.4/configure-11389- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:11390:#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1 gv-3.7.4/configure-11391-_ACEOF ############################################## gv-3.7.4/configure-11419- gl_source_base='tests' gv-3.7.4/configure:11420: gltests_WITNESS=IN_`echo "${PACKAGE-$PACKAGE_TARNAME}" | LC_ALL=C tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ | LC_ALL=C sed -e 's/[^A-Z0-9_]/_/g'`_GNULIB_TESTS gv-3.7.4/configure-11421- ############################################## gv-3.7.4/configure-11598- do gv-3.7.4/configure:11599: as_ac_Lib=`$as_echo "ac_cv_lib_$lib''_gzopen" | $as_tr_sh` gv-3.7.4/configure-11600-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gzopen in -l$lib" >&5 ############################################## gv-3.7.4/configure-11650- do gv-3.7.4/configure:11651: as_ac_Lib=`$as_echo "ac_cv_lib_$lib''_BZ2_bzopen" | $as_tr_sh` gv-3.7.4/configure-11652-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BZ2_bzopen in -l$lib" >&5 ############################################## gv-3.7.4/configure-12106-do : gv-3.7.4/configure:12107: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` gv-3.7.4/configure-12108-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ############################################## gv-3.7.4/configure-12111- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:12112:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 gv-3.7.4/configure-12113-_ACEOF ############################################## gv-3.7.4/configure-12143-do : gv-3.7.4/configure:12144: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` gv-3.7.4/configure-12145-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ############################################## gv-3.7.4/configure-12148- cat >>confdefs.h <<_ACEOF gv-3.7.4/configure:12149:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 gv-3.7.4/configure-12150-_ACEOF ############################################## gv-3.7.4/configure-12484- for ac_var in incroot usrlibdir libdir; do gv-3.7.4/configure:12485: eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" gv-3.7.4/configure-12486- done ############################################## gv-3.7.4/configure-12594- LIBS=$ac_save_LIBS gv-3.7.4/configure:12595:for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` gv-3.7.4/configure-12596-do ############################################## gv-3.7.4/configure-13549- test $ac_status = 0; }; then gv-3.7.4/configure:13550: pkg_cv_DEPS_CFLAGS=`$PKG_CONFIG --cflags "xaw3d" 2>/dev/null` gv-3.7.4/configure-13551-else ############################################## gv-3.7.4/configure-13567- test $ac_status = 0; }; then gv-3.7.4/configure:13568: pkg_cv_DEPS_LIBS=`$PKG_CONFIG --libs "xaw3d" 2>/dev/null` gv-3.7.4/configure-13569-else ############################################## gv-3.7.4/configure-13586- if test $_pkg_short_errors_supported = yes; then gv-3.7.4/configure:13587: DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xaw3d"` gv-3.7.4/configure-13588- else gv-3.7.4/configure:13589: DEPS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xaw3d"` gv-3.7.4/configure-13590- fi ############################################## gv-3.7.4/configure-13818- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' gv-3.7.4/configure:13819: ac_i=`$as_echo "$ac_i" | sed "$ac_script"` gv-3.7.4/configure-13820- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ############################################## gv-3.7.4/configure-13883- sed_drop_objext='s/\.o$//;s/\.obj$//' gv-3.7.4/configure:13884: for i in `for i in $gl_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do gv-3.7.4/configure-13885- gl_libobjs="$gl_libobjs $i.$ac_objext" ############################################## gv-3.7.4/configure-13899- sed_drop_objext='s/\.o$//;s/\.obj$//' gv-3.7.4/configure:13900: for i in `for i in $gltests_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do gv-3.7.4/configure-13901- gltests_libobjs="$gltests_libobjs $i.$ac_objext" ############################################## gv-3.7.4/configure-13985-if test -z "$BASH_VERSION$ZSH_VERSION" \ gv-3.7.4/configure:13986: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then gv-3.7.4/configure-13987- as_echo='print -r --' gv-3.7.4/configure-13988- as_echo_n='print -rn --' gv-3.7.4/configure:13989:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then gv-3.7.4/configure-13990- as_echo='printf %s\n' ############################################## gv-3.7.4/configure-13992-else gv-3.7.4/configure:13993: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then gv-3.7.4/configure-13994- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## gv-3.7.4/configure-14002- expr "X$arg" : "X\\(.*\\)$as_nl"; gv-3.7.4/configure:14003: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; gv-3.7.4/configure-14004- esac; ############################################## gv-3.7.4/configure-14078-# --------------------------------- gv-3.7.4/configure:14079:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are gv-3.7.4/configure-14080-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## gv-3.7.4/configure-14150- { gv-3.7.4/configure:14151: as_val=`expr "$@" || test $? -eq 1` gv-3.7.4/configure-14152- } ############################################## gv-3.7.4/configure-14254- case $as_dir in #( gv-3.7.4/configure:14255: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( gv-3.7.4/configure-14256- *) as_qdir=$as_dir;; ############################################## gv-3.7.4/configure-14311- esac; gv-3.7.4/configure:14312: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( gv-3.7.4/configure-14313- ???[sx]*):;;*)false;;esac;fi ############################################## gv-3.7.4/configure-14401-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 gv-3.7.4/configure:14402:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" gv-3.7.4/configure-14403-ac_cs_version="\\ ############################################## gv-3.7.4/configure-14426- --*=*) gv-3.7.4/configure:14427: ac_option=`expr "X$1" : 'X\([^=]*\)='` gv-3.7.4/configure:14428: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` gv-3.7.4/configure-14429- ac_shift=: ############################################## gv-3.7.4/configure-14450- case $ac_optarg in gv-3.7.4/configure:14451: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; gv-3.7.4/configure-14452- esac ############################################## gv-3.7.4/configure-14457- case $ac_optarg in gv-3.7.4/configure:14458: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; gv-3.7.4/configure-14459- esac ############################################## gv-3.7.4/configure-14586-fi gv-3.7.4/configure:14587:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` gv-3.7.4/configure-14588-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ############################################## gv-3.7.4/configure-14603- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 gv-3.7.4/configure:14604:ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` gv-3.7.4/configure-14605-ac_delim='%!_!# ' ############################################## gv-3.7.4/configure-14609- gv-3.7.4/configure:14610: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` gv-3.7.4/configure-14611- if test $ac_delim_n = $ac_delim_num; then ############################################## gv-3.7.4/configure-14739-for ac_last_try in false false :; do gv-3.7.4/configure:14740: ac_t=`sed -n "/$ac_delim/p" confdefs.h` gv-3.7.4/configure-14741- if test -z "$ac_t"; then ############################################## gv-3.7.4/configure-14871- esac gv-3.7.4/configure:14872: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac gv-3.7.4/configure-14873- as_fn_append ac_file_inputs " '$ac_f'" ############################################## gv-3.7.4/configure-14930-*) gv-3.7.4/configure:14931: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` gv-3.7.4/configure-14932- # A ".." for each directory in $ac_dir_suffix. gv-3.7.4/configure:14933: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` gv-3.7.4/configure-14934- case $ac_top_builddir_sub in ############################################## gv-3.7.4/configure-14991-/@mandir@/p' gv-3.7.4/configure:14992:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in gv-3.7.4/configure-14993-*datarootdir*) ac_datarootdir_seen=yes;; ############################################## gv-3.7.4/configure-15008- gv-3.7.4/configure:15009:# Neutralize VPATH when `$srcdir' = `.'. gv-3.7.4/configure-15010-# Shell code in configure.ac might set extrasub. ############################################## gv-3.7.4/configure-15036-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && gv-3.7.4/configure:15037: { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && gv-3.7.4/configure:15038: { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && gv-3.7.4/configure-15039- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ############################################## gv-3.7.4/configure-15081- * ) gv-3.7.4/configure:15082: _am_stamp_count=`expr $_am_stamp_count + 1` ;; gv-3.7.4/configure-15083- esac ############################################## gv-3.7.4/configure-15128- # Strip MF so we end up with the name of the file. gv-3.7.4/configure:15129: mf=`echo "$mf" | sed -e 's/:.*$//'` gv-3.7.4/configure-15130- # Check whether this is an Automake generated Makefile or not. ############################################## gv-3.7.4/configure-15165- # from the Makefile without running `make'. gv-3.7.4/configure:15166: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` gv-3.7.4/configure-15167- test -z "$DEPDIR" && continue gv-3.7.4/configure:15168: am__include=`sed -n 's/^am__include = //p' < "$mf"` gv-3.7.4/configure-15169- test -z "am__include" && continue gv-3.7.4/configure:15170: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` gv-3.7.4/configure-15171- # When using ansi2knr, U may be empty or an underscore; expand it gv-3.7.4/configure:15172: U=`sed -n 's/^U = //p' < "$mf"` gv-3.7.4/configure-15173- # Find all dependency output files, they are included files with ############################################## gv-3.7.4/aclocal.m4-94- PKG_CHECK_EXISTS([$3], gv-3.7.4/aclocal.m4:95: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], gv-3.7.4/aclocal.m4-96- [pkg_failed=yes]) ############################################## gv-3.7.4/aclocal.m4-142- if test $_pkg_short_errors_supported = yes; then gv-3.7.4/aclocal.m4:143: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` gv-3.7.4/aclocal.m4-144- else gv-3.7.4/aclocal.m4:145: $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` gv-3.7.4/aclocal.m4-146- fi ############################################## gv-3.7.4/aclocal.m4-225-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to gv-3.7.4/aclocal.m4:226:# `$srcdir', `$srcdir/..', or `$srcdir/../..'. gv-3.7.4/aclocal.m4-227-# ############################################## gv-3.7.4/aclocal.m4-249-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: gv-3.7.4/aclocal.m4:250:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` gv-3.7.4/aclocal.m4-251-# and then we would define $MISSING as ############################################## gv-3.7.4/aclocal.m4-265-# expand $ac_aux_dir to an absolute path gv-3.7.4/aclocal.m4:266:am_aux_dir=`cd $ac_aux_dir && pwd` gv-3.7.4/aclocal.m4-267-]) ############################################## gv-3.7.4/aclocal.m4-366- if test "$am_compiler_list" = ""; then gv-3.7.4/aclocal.m4:367: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` gv-3.7.4/aclocal.m4-368- fi ############################################## gv-3.7.4/aclocal.m4-512- # Strip MF so we end up with the name of the file. gv-3.7.4/aclocal.m4:513: mf=`echo "$mf" | sed -e 's/:.*$//'` gv-3.7.4/aclocal.m4-514- # Check whether this is an Automake generated Makefile or not. ############################################## gv-3.7.4/aclocal.m4-521- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then gv-3.7.4/aclocal.m4:522: dirpart=`AS_DIRNAME("$mf")` gv-3.7.4/aclocal.m4-523- else ############################################## gv-3.7.4/aclocal.m4-527- # from the Makefile without running `make'. gv-3.7.4/aclocal.m4:528: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` gv-3.7.4/aclocal.m4-529- test -z "$DEPDIR" && continue gv-3.7.4/aclocal.m4:530: am__include=`sed -n 's/^am__include = //p' < "$mf"` gv-3.7.4/aclocal.m4-531- test -z "am__include" && continue gv-3.7.4/aclocal.m4:532: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` gv-3.7.4/aclocal.m4-533- # When using ansi2knr, U may be empty or an underscore; expand it gv-3.7.4/aclocal.m4:534: U=`sed -n 's/^U = //p' < "$mf"` gv-3.7.4/aclocal.m4-535- # Find all dependency output files, they are included files with ############################################## gv-3.7.4/aclocal.m4-543- test -f "$dirpart/$file" && continue gv-3.7.4/aclocal.m4:544: fdir=`AS_DIRNAME(["$file"])` gv-3.7.4/aclocal.m4-545- AS_MKDIR_P([$dirpart/$fdir]) ############################################## gv-3.7.4/aclocal.m4-610-AC_REQUIRE([AC_PROG_INSTALL])dnl gv-3.7.4/aclocal.m4:611:if test "`cd $srcdir && pwd`" != "`pwd`"; then gv-3.7.4/aclocal.m4-612- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## gv-3.7.4/aclocal.m4-712- * ) gv-3.7.4/aclocal.m4:713: _am_stamp_count=`expr $_am_stamp_count + 1` ;; gv-3.7.4/aclocal.m4-714- esac gv-3.7.4/aclocal.m4-715-done gv-3.7.4/aclocal.m4:716:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) gv-3.7.4/aclocal.m4-717- ############################################## gv-3.7.4/aclocal.m4-827-# Ignore all kinds of additional output from `make'. gv-3.7.4/aclocal.m4:828:case `$am_make -s -f confmf 2> /dev/null` in #( gv-3.7.4/aclocal.m4-829-*the\ am__doit\ target*) ############################################## gv-3.7.4/aclocal.m4-837- echo '.include "confinc"' > confmf gv-3.7.4/aclocal.m4:838: case `$am_make -s -f confmf 2> /dev/null` in #( gv-3.7.4/aclocal.m4-839- *the\ am__doit\ target*) ############################################## gv-3.7.4/aclocal.m4-990-if ( gv-3.7.4/aclocal.m4:991: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` gv-3.7.4/aclocal.m4-992- if test "$[*]" = "X"; then gv-3.7.4/aclocal.m4-993- # -L didn't work. gv-3.7.4/aclocal.m4:994: set X `ls -t "$srcdir/configure" conftest.file` gv-3.7.4/aclocal.m4-995- fi ############################################## gv-3.7.4/depcomp-67- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} gv-3.7.4/depcomp:68:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} gv-3.7.4/depcomp-69- ############################################## gv-3.7.4/depcomp-224- # Version 6 uses the directory in both cases. gv-3.7.4/depcomp:225: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` gv-3.7.4/depcomp-226- test "x$dir" = "x$object" && dir= gv-3.7.4/depcomp:227: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` gv-3.7.4/depcomp-228- if test "$libtool" = yes; then ############################################## gv-3.7.4/depcomp-253- # Do two passes, one to just change these to gv-3.7.4/depcomp:254: # `$object: dependent.h' and one to simply `dependent.h:'. gv-3.7.4/depcomp-255- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" ############################################## gv-3.7.4/depcomp-295- # Do two passes, one to just change these to gv-3.7.4/depcomp:296: # `$object: dependent.h' and one to simply `dependent.h:'. gv-3.7.4/depcomp-297- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ############################################## gv-3.7.4/depcomp-311- # Much of this is similar to the tru64 case; see comments there. gv-3.7.4/depcomp:312: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` gv-3.7.4/depcomp-313- test "x$dir" = "x$object" && dir= gv-3.7.4/depcomp:314: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` gv-3.7.4/depcomp-315- if test "$libtool" = yes; then ############################################## gv-3.7.4/depcomp-355- # Subdirectories are respected. gv-3.7.4/depcomp:356: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` gv-3.7.4/depcomp-357- test "x$dir" = "x$object" && dir= gv-3.7.4/depcomp:358: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` gv-3.7.4/depcomp-359- ############################################## gv-3.7.4/depcomp-501- done gv-3.7.4/depcomp:502: obj_suffix=`echo "$object" | sed 's/^.*\././'` gv-3.7.4/depcomp-503- touch "$tmpdepfile"