# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2014 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@TURBO_TRUE@am__append_1 = -Ofast
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc2.m4 \
	$(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/intdiv0.m4 $(top_srcdir)/m4/intl.m4 \
	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax.m4 \
	$(top_srcdir)/m4/inttypes-pri.m4 \
	$(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lcmessage.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/lock.m4 $(top_srcdir)/m4/longlong.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
	$(top_srcdir)/m4/printf-posix.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/stdint_h.m4 \
	$(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/visibility.m4 \
	$(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wint_t.m4 \
	$(top_srcdir)/m4/xsize.m4 \
	$(top_srcdir)/mk/autoconf/acx_pthread.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES = intl/Makefile
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(docdir)"
DATA = $(doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = libOSC intl libweed src m4 lives-plugins po resources
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/intl/Makefile.in \
	ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README \
	compile config.guess config.rpath config.sub install-sh \
	ltmain.sh missing mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
DIST_TARGETS = dist-bzip2 dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
ALSA_CFLAGS = @ALSA_CFLAGS@
ALSA_LIBS = @ALSA_LIBS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@ $(am__append_1)
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DIRAC_CFLAGS = @DIRAC_CFLAGS@
DIRAC_LIBS = @DIRAC_LIBS@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FFTW3F_CFLAGS = @FFTW3F_CFLAGS@
FFTW3F_LIBS = @FFTW3F_LIBS@
FGREP = @FGREP@
GENCAT = @GENCAT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GLIBC2 = @GLIBC2@
GLIBC21 = @GLIBC21@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_LIBS = @GLIB_LIBS@
GLU_CFLAGS = @GLU_CFLAGS@
GLU_LIBS = @GLU_LIBS@
GL_CFLAGS = @GL_CFLAGS@
GL_LIBS = @GL_LIBS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
GTK_LIBS_NODYNAMIC = @GTK_LIBS_NODYNAMIC@
HAVE_ASPRINTF = @HAVE_ASPRINTF@
HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@
HAVE_SNPRINTF = @HAVE_SNPRINTF@
HAVE_VISIBILITY = @HAVE_VISIBILITY@
HAVE_WPRINTF = @HAVE_WPRINTF@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBAVCODEC_CFLAGS = @LIBAVCODEC_CFLAGS@
LIBAVCODEC_LIBS = @LIBAVCODEC_LIBS@
LIBAVFORMAT_CFLAGS = @LIBAVFORMAT_CFLAGS@
LIBAVFORMAT_LIBS = @LIBAVFORMAT_LIBS@
LIBAVUTIL_CFLAGS = @LIBAVUTIL_CFLAGS@
LIBAVUTIL_LIBS = @LIBAVUTIL_LIBS@
LIBBZ_CFLAGS = @LIBBZ_CFLAGS@
LIBBZ_LIBS = @LIBBZ_LIBS@
LIBDV_CFLAGS = @LIBDV_CFLAGS@
LIBDV_LIBS = @LIBDV_LIBS@
LIBFREENECT_CFLAGS = @LIBFREENECT_CFLAGS@
LIBFREENECT_LIBS = @LIBFREENECT_LIBS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBMULTITHREAD = @LIBMULTITHREAD@
LIBOBJS = @LIBOBJS@
LIBPROJECTM_CFLAGS = @LIBPROJECTM_CFLAGS@
LIBPROJECTM_LIBS = @LIBPROJECTM_LIBS@
LIBPTH = @LIBPTH@
LIBPTH_PREFIX = @LIBPTH_PREFIX@
LIBS = @LIBS@
LIBSWRESAMPLE_CFLAGS = @LIBSWRESAMPLE_CFLAGS@
LIBSWRESAMPLE_LIBS = @LIBSWRESAMPLE_LIBS@
LIBSWSCALE_CFLAGS = @LIBSWSCALE_CFLAGS@
LIBSWSCALE_LIBS = @LIBSWSCALE_LIBS@
LIBTHREAD = @LIBTHREAD@
LIBTOOL = @LIBTOOL@
LIBVISUAL_CFLAGS = @LIBVISUAL_CFLAGS@
LIBVISUAL_LIBS = @LIBVISUAL_LIBS@
LIBZ_CFLAGS = @LIBZ_CFLAGS@
LIBZ_LIBS = @LIBZ_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBC = @LTLIBC@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
LTLIBOBJS = @LTLIBOBJS@
LTLIBPTH = @LTLIBPTH@
LTLIBTHREAD = @LTLIBTHREAD@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MJPEGTOOLS_CFLAGS = @MJPEGTOOLS_CFLAGS@
MJPEGTOOLS_LIBS = @MJPEGTOOLS_LIBS@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OGG_CFLAGS = @OGG_CFLAGS@
OGG_LIBS = @OGG_LIBS@
OIL_CFLAGS = @OIL_CFLAGS@
OIL_LIBS = @OIL_LIBS@
OPENCV_CFLAGS = @OPENCV_CFLAGS@
OPENCV_LIBS = @OPENCV_LIBS@
OPENCV_LIBS_ONLY_L = @OPENCV_LIBS_ONLY_L@
ORC_CFLAGS = @ORC_CFLAGS@
ORC_LIBS = @ORC_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PNG_CFLAGS = @PNG_CFLAGS@
PNG_LIBS = @PNG_LIBS@
POSUB = @POSUB@
PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
PULSE_CFLAGS = @PULSE_CFLAGS@
PULSE_LIBS = @PULSE_LIBS@
RANLIB = @RANLIB@
SDL2_CFLAGS = @SDL2_CFLAGS@
SDL2_LIBS = @SDL2_LIBS@
SDL2_PREFIX = @SDL2_PREFIX@
SDL_CFLAGS = @SDL_CFLAGS@
SDL_LIBS = @SDL_LIBS@
SDL_PREFIX = @SDL_PREFIX@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
THEORA_CFLAGS = @THEORA_CFLAGS@
THEORA_LIBS = @THEORA_LIBS@
TIRPC_CFLAGS = @TIRPC_CFLAGS@
TIRPC_LIBS = @TIRPC_LIBS@
UNICAP_CFLAGS = @UNICAP_CFLAGS@
UNICAP_LIBS = @UNICAP_LIBS@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
VORBIS_CFLAGS = @VORBIS_CFLAGS@
VORBIS_LIBS = @VORBIS_LIBS@
WAYLAND_CFLAGS = @WAYLAND_CFLAGS@
WAYLAND_LIBS = @WAYLAND_LIBS@
WEED_CFLAGS = @WEED_CFLAGS@
WEED_COMPAT_CFLAGS = @WEED_COMPAT_CFLAGS@
WEED_COMPAT_LIBS = @WEED_COMPAT_LIBS@
WEED_LIBS = @WEED_LIBS@
WEED_PLUGIN_CFLAGS = @WEED_PLUGIN_CFLAGS@
WEED_PLUGIN_LIBS = @WEED_PLUGIN_LIBS@
WEED_SLICE_CFLAGS = @WEED_SLICE_CFLAGS@
WEED_SLICE_LIBS = @WEED_SLICE_LIBS@
WEED_UTILS_CFLAGS = @WEED_UTILS_CFLAGS@
WEED_UTILS_LIBS = @WEED_UTILS_LIBS@
WINDRES = @WINDRES@
WOE32 = @WOE32@
WOE32DLL = @WOE32DLL@
X11_CFLAGS = @X11_CFLAGS@
X11_LIBS = @X11_LIBS@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XRENDER_CFLAGS = @XRENDER_CFLAGS@
XRENDER_LIBS = @XRENDER_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = "$(prefix)/share/doc/$(PACKAGE)-$(VERSION)"
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
v4l1_INCFILE = @v4l1_INCFILE@
AUTOMAKE_OPTIONS = 1.7
@ENABLE_OSC_TRUE@OSC_SUBDIRS = libOSC
MAINTAINERCLEANFILES = Makefile.in aclocal.m4 configure config.h.in \
                       stamp-h.in config.log config.cache config.status

@HAVE_SYSTEM_WEED_COMPAT_FALSE@@IS_MINGW_FALSE@WEED_SUBDIRS = libweed
@HAVE_SYSTEM_WEED_FALSE@@IS_MINGW_FALSE@WEED_SUBDIRS = libweed
@HAVE_SYSTEM_WEED_PLUGIN_FALSE@@IS_MINGW_FALSE@WEED_SUBDIRS = libweed
@HAVE_SYSTEM_WEED_UTILS_FALSE@@IS_MINGW_FALSE@WEED_SUBDIRS = libweed
SUBDIRS = $(OSC_SUBDIRS) intl $(WEED_SUBDIRS) src m4 lives-plugins po resources
PACKAGE_CAPITALISED = LiVES
sharedir = "$(prefix)/share"

#NOTE - if packaging libweed separately, weed-docs should go in libweed/Makefile.am
doc_DATA = lives-plugins/marcos-encoders/README.multi_encoder AUTHORS ChangeLog FEATURES GETTING.STARTED README OMC/lives-OMC.txt RFX/LiVES-Perl.odt  RFX/rfxbuilder.odt RFX/RFX.spec weed-docs/weedspec.txt weed-docs/weedevents.txt docs/clip_format.txt docs/c++-bindings.odt
EXTRA_DIST = \
	configure \
	build-lives-rfx-plugin* \
	smogrify \
	midi* \
	tools/autolives.pl \
	tools/batchproc.pl \
	tools/monitorlives.pl \
	tools/set_shuffle.pl \
	tools/lives* \
	po/pxgettext \
	po/make_rfx_builtin_list.pl \
	po/update_with_plugins.sh \
	po/update_with_smogrify.sh \
	po/update_with_smogrify \
	default.keymap \
	COPYING \
	COPYING.LGPL \
	INSTALL \
	menu-entries/LiVES.desktop \
	menu-entries/*.png \
	menu-entries/*.xpm \
	LiVES.doxygen \
	liblives.doxygen \
	src/liblives.cpp \
	src/liblives.hpp \
	src/lbindings.c \
	src/lbindings.h \
	$(doc_DATA)

DISTCLEANFILES = intltool-extract intltool-merge intltool-update po/POTFILES_PLUGINS
ACLOCAL_AMFLAGS = -I m4
all: all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__post_remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    --with-included-gettext \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs-am:
	for dir in "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local install-docDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-exec-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-docDATA uninstall-local

.MAKE: $(am__recursive_targets) install-am install-exec-am \
	install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip distcheck distclean \
	distclean-generic distclean-libtool distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-docDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-hook \
	install-exec-local install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-docDATA uninstall-local

.PRECIOUS: Makefile


@HAVE_DOXYGEN_TRUE@docs-doxygen:
@HAVE_DOXYGEN_TRUE@	$(DOXYGEN) LiVES.doxygen
@BUILD_LIBLIVES_TRUE@@HAVE_DOXYGEN_TRUE@	$(DOXYGEN) liblives.doxygen
@HAVE_DOXYGEN_FALSE@docs-doxygen:
@HAVE_DOXYGEN_FALSE@	@echo "Doxygen not installed, skipping sourcecode documentation"

installdirs: 
	mkinstalldirs
	"$(srcdir)/mkinstalldirs" \
	$(MKDIR_P) "$(DESTDIR)$(bindir)" \
	$(MKDIR_P) "$(DESTDIR)$(datadir)" \
	$(MKDIR_P) "$(DESTDIR)$(docdir)" \
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/applications/" \
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/pixmaps/" \
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/$(PACKAGE)/resources/" \
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/$(PACKAGE)/tools/"

install-data-local:
	make docs-doxygen
@HAVE_DOXYGEN_TRUE@	$(MKDIR_P) "$(DESTDIR)$(docdir)/html/LiVES"
@HAVE_DOXYGEN_TRUE@	cp -rf "$(srcdir)/docs/doxygen/html/"* "$(DESTDIR)$(docdir)/html/LiVES"
@BUILD_LIBLIVES_TRUE@@HAVE_DOXYGEN_TRUE@	$(MKDIR_P) "$(DESTDIR)$(docdir)/html/liblives"
@BUILD_LIBLIVES_TRUE@@HAVE_DOXYGEN_TRUE@	cp -rf "$(srcdir)/docs/doxygen/liblives/html/"* "$(DESTDIR)$(docdir)/html/liblives"
#NOTE - if packaging libweed separately, this should go in libweed/Makefile.am
@HAVE_DOXYGEN_TRUE@	$(MKDIR_P) "$(DESTDIR)$(docdir)/html/libweed"

@HAVE_DOXYGEN_TRUE@@HAVE_SYSTEM_WEED_FALSE@	cp -rf "$(srcdir)/weed-docs/doxygen/html/"* "$(DESTDIR)$(docdir)/html/libweed"

	$(MKDIR_P) "$(DESTDIR)$(sharedir)/applications/"
	cp -f "$(srcdir)/menu-entries/LiVES.desktop" "$(DESTDIR)$(sharedir)/applications/"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/pixmaps/"
	cp -f "$(srcdir)/menu-entries/lives32.xpm" "$(DESTDIR)$(sharedir)/pixmaps/lives.xpm"
	cp -f "$(srcdir)/menu-entries/lives48.png" "$(DESTDIR)$(sharedir)/pixmaps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/app-install/icons/"
	cp -f "$(srcdir)/menu-entries/lives64.png" "$(DESTDIR)$(sharedir)/app-install/icons/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/48x48/apps/"
	cp -f "$(srcdir)/menu-entries/lives48.png" "$(DESTDIR)$(sharedir)/icons/hicolor/48x48/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/64x64/apps/"
	cp -f "$(srcdir)/menu-entries/lives64.png" "$(DESTDIR)$(sharedir)/icons/hicolor/64x64/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/128x128/apps/"
	cp -f "$(srcdir)/menu-entries/lives128.png" "$(DESTDIR)$(sharedir)/icons/hicolor/128x128/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/256x256/apps/"
	cp -f "$(srcdir)/menu-entries/lives256.png" "$(DESTDIR)$(sharedir)/icons/hicolor/256x256/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/32x32/apps/"
	cp -f "$(srcdir)/menu-entries/lives32.png" "$(DESTDIR)$(sharedir)/icons/hicolor/32x32/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/16x16/apps/"
	cp -f "$(srcdir)/menu-entries/lives16.png" "$(DESTDIR)$(sharedir)/icons/hicolor/16x16/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/icons/hicolor/22x22/apps/"
	cp -f "$(srcdir)/menu-entries/lives22.png" "$(DESTDIR)$(sharedir)/icons/hicolor/22x22/apps/lives.png"
	$(MKDIR_P) "$(DESTDIR)$(sharedir)/$(PACKAGE)/devicemaps/"
	cp -rf "$(srcdir)/resources/devicemaps/" "$(DESTDIR)$(sharedir)/$(PACKAGE)/"

install-exec-local:
	rm -rf "$(DESTDIR)$(bindir)/lives"
	cp -f "$(srcdir)/smogrify" "$(DESTDIR)$(bindir)" && chmod a+rx "$(DESTDIR)$(bindir)/smogrify"
	cp -f "$(srcdir)/midistart" "$(DESTDIR)$(bindir)" && chmod a+rx "$(DESTDIR)$(bindir)/midistart"
	cp -f "$(srcdir)/midistop" "$(DESTDIR)$(bindir)" && chmod a+rx "$(DESTDIR)$(bindir)/midistop"
	cp -f "$(srcdir)/tools/autolives.pl" "$(DESTDIR)$(bindir)" && chmod a+rx "$(DESTDIR)$(bindir)/autolives.pl"
	cp -f "$(srcdir)/build-lives-rfx-plugin" "$(DESTDIR)$(bindir)" && chmod a+rx "$(DESTDIR)$(bindir)/build-lives-rfx-plugin"
	cp -f "$(srcdir)/build-lives-rfx-plugin-multi" "$(DESTDIR)$(bindir)" && chmod a+rx "$(DESTDIR)$(bindir)/build-lives-rfx-plugin-multi"
	cp -f "$(srcdir)/default.keymap" "$(DESTDIR)$(datadir)/$(PACKAGE)/"
	"$(DESTDIR)$(bindir)/build-lives-rfx-plugin-multi" builtin "$(DESTDIR)$(datadir)" "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
	"$(top_srcdir)/po/update_with_plugins.sh" install "$(PACKAGE)" "$(prefix)" "$(DESTDIR)"

install-exec-hook:
	$(LN_S) "lives-exe" "$(DESTDIR)$(bindir)/lives"

uninstall-local:
	rm -rf "$(bindir)/lives"
	rm -rf "$(bindir)/lives-exe"
	rm -rf "$(bindir)/smogrify"
	rm -rf "$(bindir)/midistart"
	rm -rf "$(bindir)/midistop"
	rm -rf "$(bindir)/autolives.pl"
	rm -rf "$(bindir)/build-lives-rfx-plugin"
	rm -rf "$(bindir)/build-lives-rfx-plugin-multi"
	rm -rf "$(datadir)/$(PACKAGE)"
	rm -rf "$(libdir)/$(PACKAGE)"
	rm -rf "$(sharedir)/$(PACKAGE)"
	rm -rf "$(docdir)"
	rm -rf "$(sharedir)/applications/LiVES.desktop"
	rm -rf "$(sharedir)/pixmaps/lives.xmp"

	@echo
	@echo "		*** WARNING - user specific configuration files have NOT been removed."
	@echo "		*** To complete uninstallation, you may wish to remove ~/.lives and ~/.lives-dir" 

dist-hook:
	"$(top_srcdir)/po/update_with_plugins.sh" dist "$(PACKAGE)" "$(prefix)"
	rm -rf "$(distdir)/po/"*.gmo
	rm -rf "$(distdir)/"*~

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
