Changes in July 2000

27.07.00	Cenon

Datum	Datei	VerÙndert
----------------------------------------------------------------------------------------------
03.07.00	

3.20

09.07.00	Xyz.m	-xyzLoadParams: -> #TOG (tool offset get)
		-xyzMeasureToolOffset -> new
		-xyzSetTool: -> measure tool offset
		call -setXYZToolByString:offset: in Cenon
	Xyz.h	toolMeasure, toolGetOffset -> new
		XYZSUBPROCESS = controller.app
	apXyz.m	-setXYZToolByString:offset: -> set offset for tool
		-startXyzSubProcess: -> %@/%@ for XYZSUBPROCESS
	ToolObject.m, h	clean up
	DPMagazine.m	-clickTool: -> [[NSApp xyz] setTool:toolObject]
10.07.00	XYZ	VHFDictionaryAdditions, ToolObject added
	ToolObject.m	-addToArray: -> use of setInt:
	Xyz.m	-executeVector: -> state.zOffset not set to 0
		-stop, -adjustment, -executeVector, xyzSetTool: -> moveZ to ZUpPosition()
		 -setOriginZ, setOrigin::: -> move z to z+state.zOffset
		xyzSetKnife -> check state.point instead of mPoint, compare to ZUpPosition()
		-selectTool: -> measureing added, manual change added
	XYZ/messages.h	DESELECTTOOL_STRING -> new
	ioFunctions.m, h	ioInputInstruction() -> terminator counting added
	DPLayer.m	clickLayer: -> set tool
	DPToolParms.m	-update: -> enable/disable adjustModeSwitch, zOffsetField
		-update: -> [self flush] removed
		-update: -> no longer set tool parmameter
		-setRevolution:, -setCuttingSpeed:, -setLoweringSpeed:, -> set parameter for selected tool only
		-setZOffset: -> check for automatic measurement
	Rectangle.m	-hit: -> rotate p
	*.m	rotatePointAroundCenter() -> vhfRotatePointAroundCenter()
	Arc.m	calcPointAngleFromRefPoint() -> pass NSPoint instead of pointer
	Curve.m	-hitControl: -> lastDist increased
	DPMagazine.m	-clickTool:, doubleClickTool: -> return void
		no longer set tool parameter
		-setMagazineAt: -> no longer set tool parameter
	DPLayer.m	-clickLayer:, -update: -> no longer set tool parmameter
	DPToolParms.nib	selectToolButton -> enabled
	DPControl.m	-setSwitch: -> set rev of selected tool in xyz (not magazine)
	DPControl.h
	DPControl.nib	infoMatrix -> new
	messages.h	NOTOOLSELECTED_STRING -> new
11.07.00	Xyz.h	ops.helix -> new
	Xyz.m	-xyzLoadParms: -> ops.helix added
		-xyzThread:, xyzHelixTo::: -> new
		-selectTool: -> deselect in Cenon
	vhf2DFunctions.m, h	vhfCalcPointAngleFromRefPoint() -> vhfPointAngleFromRefPoint()
	DPControl.m	-setOriginZDown: -> tool offset added
	DPMagazine.m	-toolFromString: -> checked for string == nil

3.21

12.07.00	IPThread.m, h, nib	new
	InspectorPanel.m	-loadGraphic: ->thread replaces spriral, 
		title and levelView outside of cases
	InspectorPanel.h	thread instead of spiral
	Thread.m, h	new
	E2DGraphics.h	thread.h
	Editor2DView.m	-mouseDown: -> Thread
	DPToolParms.nib	Thread Cutter added to PopUp
	ToolObject.h, Xyz.h	TYPE_THREADCUTTER
	Xyz.m	xyzSetTool: -> update state before moving z
		-executePath -> don't force tool selection if automatic
		-executeVector: -> don't remove tool in Cenon when finished
	DPToolParms.m	-setType: -> thread cutter added
		-update: -> calls updatePanelActivation
		-updatePanelActivation -> new
		-setTipAngle: -> thread stuff added
		-setPitch: -> new
		-setMaxDiameter: -> thread core diameter added
	e2Output.m	-calcOutputFor: -> TYšE_THREADCUTTER added
	ToolObject.m	-initWithDictionary, -addToArray: -> thread cutter added
	CNC750.dev	#HEL added
	DPControl.m	-start: -> if( !r.size.width && !r.size.height )... to work around Unite bug

3.22

16.07.00	Line3D.h	+line3D -> new
	PickOut.m
	PathCFill.m
	PathContour.m	update
18.07.00	vhfDPSFunctions.m	DPS_OPS_LIMIT = 990, 1000 didn't work in one case
		PSWait() behind PSDoUserPath
22.07.00	*.m	#import "GraphicViewWraps.h" removed 
	PickOut.m, h	updated
20.07.00	Path.m, h	pickOutWithTipAngle: -> + overlap
	e2Output.m	calcOutputFor: -> + overlap
27.07.00	PathContour.m	contourPath: -> Kontur linie dichter an Graphik gelegt !
		contourImage: -> -"- waren zu weit weg !
28.07.00	LayerCell.m	#import "../messages.h"
		-trackMouse:... -> warn user before removing fill layer of pick out
	messages.h	SIDELEAVEPICKOUT_STRING -> new
	German/Localized.strings	new message for pick out added
30.07.00	PathContour.m	contourPath:, contourImage: -> Kontur linie wieder weiter weg !!! daför um versetzten arc center nach oben rechts geschoben
31.07.00	DPPositions.m	-addPositionWithName: -> if layer exists display existing layer
	TextPath.m, h	new

next 3.23